Professor
Dr. Md. Farhad Ali
Institute of Leather Engineering and Technology
Institutes
| Degree Name | Group/Major Subject | Board/Institute | Country | Passing Year |
|---|---|---|---|---|
| Masters | Chemistry | Rajshahi University | Bangladesh | 1993 |
| Bachelor | Chemistry | Rajshahi University | Bangladesh | 1992 |
| H.S.C | Science | Dhaka | Bangladesh | 1989 |
| S.S.C | Science | Dhaka | Bangladesh | 1987 |
| Title | Organization | Location | From Date | To Date | |
|---|---|---|---|---|---|
| No experience is found | |||||
Research Interest
| Subject | Description | Research Interest (Goal, Target Indicator) |
|---|---|---|
| No research interest is found | ||
Project/Research Supervision
| Level of Study | Title | Supervisor | Co-Supervisor(s) | Name of Student(s) | Area of Research | Current Completion |
|---|---|---|---|---|---|---|
| Masters | Research title: Preparation and comparative study of antimicrobial and biodegradable biofilms from fleshing waste incorporated with tamarind peel and nut peel | Dr. Md. Farhad Ali | Tanbira Yesmin | 2024 | ||
| Masters | Adsorptive removal of Cr9(VI) from industrial effluent using metal- complexed fleshing waste | Dr. Md. Farhad Ali | Muhid Khan Lipu | Physical Engineering |
2024 | |
| Masters | “Eco-Friendly Fabrication of Biopolymer Films from Tannery Waste, Zinc Oxide Nanoparticles, and Crustacean Shells: Advancing Sustainable Circular Bio-economy” | Dr. Md. Farhad Ali | Samiha Suchit Neela | 2022 | ||
| Masters | BIODEGRADABLE RETANNING MATERIAL FROM TANNERY TRIMMING WASTE: EXTRACTION, PREPARATION AND APPLICATION | Dr. Md. Farhad Ali | Tamanna JAMAN | 2022 | ||
| Masters | The influence of alum treatment on the mechanical properties of jute fiber reinforced epoxy resin composites | Dr. Md. Farhad Ali | Exam Roll: 02 | 2018 | ||
| Masters | The influence of alum treatment on the mechanical properties of jute fiber reinforced epoxy resin composites | Dr. Md. Farhad Ali | Exam Roll: 02 | 2018 | ||
| Masters | The influence of alum treatment on the mechanical properties of jute fiber reinforced epoxy resin composites | Dr. Md. Farhad Ali | Exam Roll: 02 | 2018 | ||
| Masters | Evaluation of the physical properties of lining leathers used in different footwear industries in Dhaka, Bangladesh | Dr. Md. Farhad Ali | Md. Ahsanul Haque Milon | 2018 | ||
| Masters | Heavy metals contamination in the soil tannery | Dr. Md. Farhad Ali | Nusrat Jahan | 2017 | ||
| Masters | Preparation and characterization of natural fibers reinforced polymer composites | Dr. Md. Farhad Ali | Exam Roll: 54 | 2017 | ||
| Masters | A dessertation for the partial fulfillment of the requirements for the degree of bachelor of science in leather engineering | Dr. Md. Farhad Ali | Exam Roll: 66331 | 2017 | ||
| Masters | Assessment of heavy metals in the soil of Hazaribag tannery area and their effect on human body | Dr. Md. Farhad Ali | Md. Zakaria Tomal | 2014 | ||
| Masters | Preparation and characterization of calcium carbonate treated jute fibre reinforced with unsaturated polyester resin | Dr. Md. Farhad Ali | Exam Roll: 03 | 2014 | ||
| Masters | Assessment of the solid waste generated by the leather products industry | Dr. Md. Farhad Ali | Rumpa Sultana | 2010 | ||
| Masters | Product Development of Sports Footwear with Diversified Materials. | Dr. Md. Farhad Ali | Farhan Islam Abir | 2010 | ||
| Masters | Studies on the manufacturing procedure of fashionable ladies bag using leather. | Dr. Md. Farhad Ali | Shimul Datta | 2010 | ||
| Masters | Studies on the safety compliances of footwear industries in Bangladesh | Dr. Md. Farhad Ali | Mizanur Rahman | 2009 | ||
| Masters | Studies on the marketing trends of crust and finished leather in local and world market. | Dr. Md. Farhad Ali | Syed Arifur Rahman | 2009 | ||
| Research Project Report/Other | Design of a Multi-Purpose casual footwear with enhanced comfort and stability | Dr. Md. Farhad Ali | Nayon Chandro Roy | Footwear Engineering |
2024 | |
| Research Project Report/Other | Development of Eco-Friendly unsaturated polyester resin composites for wood and PVC replacement applications reinforced with leather waste and Bio-Fillers made from tea waste, shrimp shell and pineapple skin. | Dr. Md. Farhad Ali | Niloy Mazumder | Footwear Engineering |
2024 | |
| Research Project Report/Other | Value Added Utilization of Leather and plant waste fibers in polypropylene, HDPE, and LDPE composites: Fabrication and comparative evaluation of Properties. | Dr. Md. Farhad Ali | Md. Naimur Rahman Remon | Physical Engineering |
2024 | |
| Research Project Report/Other | Sustainable Bio-Fiber reinforced unsaturated polyester composites development and comparative analysis of cow hair, coconut coir and sugarcane bagasse single and hybrid systems. | Dr. Md. Farhad Ali | Anindita Dey | Physical Engineering |
2024 | |
| Research Project Report/Other | Quality evaluation of Shoe Upper Leather Collected from Five Different Industries in Bangladesh | Dr. Md. Farhad Ali | Md. Shadad Hossain | 2018 |
Project/Research Work
| Subject | Project Name | Source of Fund | From Date | To Date | Collaboration |
|---|---|---|---|---|---|
| UGC, Bangladesh | Preparation and Characterization of Antimicrobial nanocomposite Film for Food Packaging Applications Based on ZnO-Nanoparticles, Gelatin and Chitosan Extracted from Tannery Trimming Waste and Shrimp Shells | Dhaka University-UGC, Bangladesh | 01-07-2024 | 30-06-2025 | |
| Physical Engineering | Extraction and preparation and application of biodegradable raw leather re-tanning materials from trimming waste of tannery solids and its economical perspective in Bangladesh | UGC, Bangladesh | 01-07-2022 | 30-06-2023 | |
| polymer composite | Utilization tannery and poultry wastes for the preparation of ecofriendly and sustainable composites with epoxy resin and unsaturated polyester resin | UGC, Bangladesh | 01-07-2021 | 30-06-2022 | |
| Leather Engineering | Factors and economic loss for rejection of leather in Bangladesh | Ministry of Science and Technology | 01-07-2017 | 30-06-2018 |
Invited Talk
| SL | Invited Talk |
|---|---|
| No invited talk is found | |
| SL | Collaboration & Membership Name | Type | Membership Year | Expire Year |
|---|---|---|---|---|
| No Collaboration & Membership is found | ||||
| Journal Article | |
|---|---|
| 1 |
Md. Farhad Ali and Kazi Imtiaz Ahmed Nakib , Ridwanur Rahman , Israt Jahan Lithi , Mayesha Samiha Oishi : Fabrication of waste natural fiber reinforced epoxy resin-based composite and evaluation of diverse environmental interactions,
Journal of Environmental Chemical Engineering (impact factor:7.2) , vol.13 , no.6 ELSEVIER , 2025
.
|
| 2 |
Md. Farhad Ali and Samiha Suchit Neela , Rupok Kumar Nayak , Mohammad Ashraful Islam , Md. Delwar Hossain : Eco-friendly fabrication of biopolymer films from tannery waste, zinc oxide nanoparticles, and crustacean shells: Advancing sustainable circular bio-economy,
Results in Chemistry (impact factor:4.2) , vol.18 ELSEVIER , 2025
.
|
| 3 |
Md. Farhad Ali and Sanjida Khan , Md. Sahadat Hossain , Mohammad Al Shahriar Khan, Afrin Rahman Akhi a : Preparation and characterization of eco-friendly polymer composites from leather wastes,
South African Journal of Chemical Engineering (impact factor:5.1) , vol.38 ELSEVIER , pp.461-469 , 2025
.
|
| 4 |
Md. Farhad Ali and Md. Kawsar, Md. Sahadat Hossain, Sumaiya Akter : Synthesis and Characterization of Nano-Crystallite Triple Super Phosphate (TSP) from Marine Mollusk Waste: Babylonia japonica, Oliva sayana, and Conasprella bermudensis,
ChemistryOpen (impact factor:3.4) John Wiley & Sons Inc. , 2024
.
|
| 5 |
Md. Farhad Ali and Md. Abdus Shabur & A. M. Sarwaruddin Chowdhury : Gamma radiation’s influence on the tensile characteristics of waste animal fiber reinforced biocomposites,
Discover Materials (impact factor:3.3) , vol.4 Springer Open , 2024
.
|
| 6 |
Md. Abdus Shabur1 · Md. Farhad Ali1 · Md. Mukter Alam1 : Analysis of the barriers and possible approaches for adopting Industry 4.0 in the fertilizer sector of Bangladesh,
Discover Applied Sciences (impact factor:3.2) , vol.6 Springer open , 2024
.
|
| 7 |
Md. Abdus Shabur , Md. Farhad Ali : Perspectives and possibilities for developing ride-sharing services to promote sustainable mode of transport: Bangladesh perspective,
Heliyon (impact factor:3.4) , vol.10 , no.12 Cell press , 2024
.
|
| 8 |
Md. Farhad Ali and Md. Sahadat Hossain , Samina Ahmed , A.M. Sarwaruddin Chowdhury : A study of biodegradation, water uptake and thickness swelling of animal fibers reinforced unsaturated polyester resin composites,
Results in Chemistry (impact factor:2.3) , vol.8 Elsevier , 2024
.
|
| 9 |
Md. Farhad Ali, Papia Hauque, Md. Abdulla-Al-Mamun, Tamanna Jaman : Biodegradable Retanning Material From Tannery Triming Waste: Extraction, Preparation and Application,
Leather and Footwear Journal (impact factor:0.34) , vol.23 , no.4 Revista , 2024
.
|
| 10 |
Md. Abdus Shabur and Md. Farhad Ali : An analysis of the correlation between income and the consumption of energy in Bangladesh,
Energy Informatics (impact factor:3.8) springer , pp.1-18 , 2024
.
|
| 11 |
Md. Farhad ALI and Md. Abu SAYID MIA1 , Nadia Sultana MILY , Md. Arafat Al MAMUN : CHARACTERIZATION OF ENZYME-TREATED ECO-FRIENDLY IRON TANNED LEATHER,
Leather and Footwear Journal , vol.24 , no.1 Revista , 2024
.
|
| 12 |
Md.Abdulla-Al-Mamun,Mongsathowai Marma, Md. Farhad Ali, Md. Abdul Mottalib : Recovery and Reuse of Chromium from Tannery Waste Chrome-liquor using Solar Evaporation Process.,
(impact factor:1.21) , vol.6 idd3 , pp.652-666 , 2023
.
|
| 13 |
Md. Farhad Ali, A.M.Sarwaruddin Chowdhury et al : Effects of inorganic materials on the waste chicken feather fiber reinforced unsaturated polyester resin-based composite: An approach to environmental sustainability,
Composites Part C: Open Access (impact factor:4.76) , vol.9 Elsevier , 2022
.
|
| 14 |
Md. Farhad Ali, A.M.Sarwaruddin Chowdhury et al : ). Fabrication and Characterization of Composite Materials Using Multiple Waste Materials (Leather & amp; Jute Fabrics) and Unsaturated Polyester Resin,
Nano Hybrids and Composites (impact factor:5.37) , vol.33 Nano Hybrids and Composites , , pp.1-11 , 2021
.
|
| 15 |
Md. Farhad Ali, A.M.Sarwaruddin Chowdhury et al : Utilization of waste chicken feather for the preparation of eco-friendly and sustainable composite.,
Cleaner Engineering and Technology (impact factor:5.37) , vol.4 Elsevier , 2021
.
|
| 16 |
Muhammad Abdullah Al Mamun, Md. Mehedul Hasan, Md. Farhad Ali and G. M. Shafiur Rahman : Eco-Friendly Treatment of Green Banana Fiber in Compared to Chemical Treatment,
Journal of Materials and Environmental Science (impact factor:3.55) , vol.12 , no.6 University of Mohammed Premier , pp.823-826 , 2021
.
|
| 17 |
Md. Farhad Ali, A. M. Sarwaruddin Chowdhury et al. : Fabrication and characterization of eco-friendly composite materials from natural animal fibers.,
Heliyon, (impact factor:5.6) , vol.7 , no.5 Cell Press , 2021
.
|
| 18 |
Md. Farhad Ali, A.M.Sarwaruddin Chowdhury et al : Physico-Mechanical Properties of Treated Chicken Feather–Reinforced Unsaturated Polyester Resin Based Composites.,
Nano Hybrids and Composite (impact factor:5.37) , vol.32 Scientific.Net , pp.73-84 , 2021
.
|
| 19 |
Md. Farhad ALI ,Mahbub KAMAL : A Comparative Study on Physical Properties of Bag and Lining Leather from Two Different Origins,
Journal of Environmental Science, Toxicology and Food Technology (impact factor:2.3) , vol.15 , no.3 International Organization Of Scientific Research (IOSR) , pp.33-38 , 2021
.
|
| 20 |
Umme Habiba Bodrun Naher, Md. Jawad Hasan , Md. Morshedul Hasan, Md. Farhad Ali : Trace Metal Contamination of Vegetables Grown Near the Tannery Estate in Savar, Bangladesh: Human Health Risk Assessment,
Textile and Leather Review (impact factor:1.21) , vol.4 idd3 , 2021
.
|
| 21 |
Md. Farhad Ali, Md Tanjid Ahmed Zahid, Md Tanjid Ahmed ZahidTanvir Siddike MoinTanvir Siddike Moin : Manufacturing of Novelty Leather from Sheep Stomach,
International Journal of Scientific & Engineering Research , vol.11 , no.10 , pp.314-318 , 2020
.
|
| 22 |
Farhad Ali, Mukta Rani Sarkar and Arafat Hossain : IDENTIFYING THE CAUSES OF FOOTWEAR REJECTION AND DEVISING BETTER SOLUTION FOR THE IMPROVEMENT OF FOOTWEAR QUALITY,
INTERNATIONAL JOURNAL OF CURRENT RESEARCH (impact factor:7.766) , vol.12 , no.09 , pp.13693-13698 , 2020
.
|
| 23 |
Md. Farhad Ali, Md Tanjid Ahmed Zahid and Tanvir Siddike Moin : Manufacturing of Novelty Leather from Sheep Stomach,
International Journal of Scientific & Engineering Research (impact factor:4.4) , vol.11 , no.10 , pp.314-318 , 2020
.
|
| 24 |
Md. Farhad Ali, Nadim Khan and Md Tanjid Ahmed Zahid : Assessment of Typical Heavy Metals in Bangladeshi Tannery Workers’ Hair,
International Journal of Research and Innovation in Applied Science (IJRIAS) , vol.5 , no.9 , pp.223-226 , 2020
.
|
| 25 |
Md. Farhad Ali, Adiba Fara, Umme Habiba Bodrun Naher, Kawsar Akhtar : Manufacturing of novelty leather from goat stomach,
INTERNATIONAL JOURNAL OF CURRENT RESEARCH (impact factor:8.132) , vol.11 , no.07 , pp.5156-5160 , 2019
.
|
| 26 |
Nahar, Umme Habiba Bodrun, Islam,Md. Rashidul, Mia,Md Abu Sayid and Ali, Md.Farhad : Challenges and Prospects of Tannery By-product Industries ( Glue, Gelatin, Poultry and Fish Feed Industries) in Bangladesh,
International Journal of science, Engineering and Technology Research (IJSETR) , vol.7 , pp.837-841 , 2018
.
|
| 27 |
Hasan M,, Begum L, Hosain S, Poddar P, Chowdhury A and Farhad Ali : Study on Heavy Metals ( Zine and Lead) in Drinking Water of Tannery Area, Adjacent Areas and Outside Village Areas.,
L Envirn Anal Toxicol , vol.7 , pp.433 , 2017
.
|
| 28 |
Hossain Md. Sakhawat, Rahman Md. Mizanur, Ali Md. Farhad and Nasif Tahsin Eahteshum : Investigation of Heavy Metals in Various Genre of Chicken Tissue in Dhaka City, Bangladesh,
JECET , vol.6 , no.4 , pp.394-403 , 2017
.
|
| 29 |
Khairul Bashar, JahanSadiaAfroze, Md. Farhad Ali and AshiqurRahaman : Relative study of heavy metal contamination in fishes of Buriganga River due to untreated tannery effluent and in fishes from another source in Bangladesh”, International Journal of Current Research,
International Journal of Current Research , vol.8 , no.10 , pp.4035-40403 , 2016
.
|
| 30 |
Rahaman, A., Afroze, J.S., Bashar, K., and Ali, Md. F : A Comparative Study of Heavy Metal Concentration in Different Layers of Tannery Vicinity Soil and Near Agricultural Soil,
American Journal of Analytical Chemistry , vol.7 , pp.880-889 , 2016
.
|
| 31 |
Md. Arafat Hossain,, ,, Mukta Rani Sarkar, Md. Farhad Ali and Uttam Kumar Roy : Evaluation on Economic Loss for Rejection of Finished Leather in Bangladesh,
Universal Journal of Environmental Research and Technology , vol.6 , no.2 , pp.91-96 , 2016
.
|
| 32 |
Ali Md. Farhad, Naher Umme Habiba Bodrun, Chowdhury, Rahman G.M. Shafiru and Hasan Md. Mahmudul : Investigation on Physicochemical parameters of tannery effluent,
Universal Journal of Environmental Research and Technology , vol.5 , no.3 , pp.122-130 , 2015
.
|
| 33 |
Ali Md. Farhad, Naher Umme Habiba Bodrun, Hasan Md. Mahmudul, Nawze Md. Shakil and Ferdous Shahanama : Analyzing the factors for rejection of leather in Bangladesh,
Intenational Journal of scientific and Technology Research , vol.4 , pp.332-335 , 2015
.
|
| 34 |
Naher Umme Habiba Bodrun, Ali Md. Farhad, Hasan Md. Mahmudul and Rahman Md. Rezaur : Manufacturing of Novelty Leather from Cattle Stomach,
Intenational journal of scientific and Technology Research , vol.4 , no.12 , pp.40-44 , 2015
.
|
| 35 |
Rahman G.M. Shafiur, Al-Mmamun Muhammad Abdullah, Bashar Muhammad Shafiul, M.G. Mostafa, Ali Md. Farhad and Khan Mubarak A : A study comparison between recycled waste paper reinforced polymer composite and hardboard,
Rajshahi University journal of Environment Science , vol.3 , pp.9-15 , 2014
.
|
| 36 |
Hossain M Azhar, M. Enayet and Ali Md. Farhad : Production of slow releasing fertilizer tablets,
J of Bangladesh Chemical Society , vol.12 , no.2 , pp.19-21 , 2003
.
|
| 37 |
Hossain M Azhar, M. Enayet and Ali Md. Farhad : Enhanced Physico-mechanical Properties of Polymer Resin Film Using CaCO3 Filler,
J of Bangladesh Chemical Society , vol.12 , no.2 , pp.19-21 , 2003
.
|
| Award Type | Title | Year | Country | Description |
|---|---|---|---|---|
| International | Ph.D | 2023 | Bangladesh |
Name & designation
Dr. Md. Farhad Ali
Professor
Department
Institute of Leather Engineering and Technology Institutes
Email
farhad.ilet@du.ac.bd
Phone
01711043888