Publications

A group decision-making model for assessing success factors for successfully implementing Industry 4.0 technologies toward waste valorization

Mysha Maliha and Md Ariful Islam

In Advanced Waste Valorization for Circular Economy, ed. Jingzheng Ren, Yue Liu and Md. Abdul Moktadir, Elsevier, pp. 251-267

Electronic structure–reactivity relationships in gelatin-related amino acids: a descriptor-based DFT analysis

Estehad Pathan, Syeda Shagufta and Saidur Rahman Shakil

Chemical papers, vol. 1, no. 2026, Springer

anthocyanin-based biocomposite films for the real-time monitoring of raw food freshness

Sajneen Akter Munmun, Sabina Akter, Md. Samaul Alam and Amal Kanti Deb

International Journal of Biological Macromolecules, vol. 384 (2026), Elsevier, pp. 154708

Eco-friendly Valorization of Leather Shaving Dust into Fiber-reinforced Bio-composites

Md. Imteaz Hossen Imtu, Uttam Kumar Roy, Md. Sahadat Hossain and Md. Ariful Islam

South African Journal of Chemical Engineering, vol. 58, Elsevier

Optimization of Hexavalent Chromium Removal from Wastewater Using Activated Carbon Derived from Liming Pelt Trimming and Tannin: A Response Surface Methodology Approach

Md. Faiaz Hossain, Md. Abdul Mottalib, Md. Abdul Goni and Trisha Paul

ACS Omega, ACS Publications

Unhairing of goatskin using crude protease enzyme from Alcaligenaceae sp. to reduce chemical usage and wastewater pollution

Fatema Tujjohra, Md. Samaul Alam, Sumaiya Mim, Papia Haque, Ramisa Farjana Megumi and Mohammed Mizanur Rahman

Next Bioengineering, vol. 3, Elsevier, pp. 100043

Sustainable polymer composites reinforced with leather waste using natural rubber latex, aluminum oxide and fish oil

Md Farhad Ali, Rupok Kumar Nayak, Mohammad Al Shahriar Khan, Md Ahsanul Haque Milon and Md Abdus Shabur

Discover Materials, Springer

Sustainable Extraction of Collagen from Tannery Raw Trimmings Using Ginger Peel-Derived Zingibain Enzyme: Process Optimization with Box-Behnken Design

Md Faiaz Hossain, Mysha Maliha, Taslim Ur Rashid and Mohammad Kamruzzaman

ACS Omega, American Chemical Society

Sustainable Extraction of Collagen from Tannery Raw Trimmings Using Ginger Peel-Derived Zingibain Enzyme: Process Optimization with Box-Behnken Design

Mohammad Kamruzzaman and Md Faiaz Hossain, Mysha Maliha, Taslim Ur Rashid

ACS OMEGA, vol. 11, ACS Publications, pp. 42103−42117

Sustainable Management of Chrome Shaving Dust for Leather Particle Board Preparation: A Circular Economy Approach

Fatema Tujjohra, Masrafe Bin Imran, Hasibur Rahaman Bhuiyan, Md Rayhan Sarker and Mohammed Mizanur Rahman

ACS Sustainable Resource Management, vol. 3, no. 7, American Chemical Society, pp. 2399-2414

Extraction of Cellulose Nanocrystals from Nypa fruticans and Their Reinforcement Effect in PVC–Leather Waste Composites

Md. Ariful Islam, Nujhat Tabassum, Md. Abdus Shabur, Umme Habiba Bodrun Naher and Md. Abdul Mottalib

Textile & Leather Review, vol. 9, pp. 6039-6067

Extraction of Cellulose Nanocrystals from Nypa fruticans and Their Reinforcement Effect in PVC–Leather Waste Composites

Md. Ariful Islam, Nujhat Tabassum, Md. Abdus Shabur, Umme Habiba Bodrun Naher and Md. Abdul Mottalib

Textile & Leather Review, vol. 9, idd3, pp. 6039-6067

Extraction of Cellulose Nanocrystals from Nypa fruticans and Their Reinforcement Effect in PVC--Leather Waste Composites

Md Ariful Islam, Nujhat Tabassum, Md Abdus Shabur, Umme Habiba Bodrun Naher and Md Abdul Mottalib

Textile & Leather Review, vol. 9, no. 2026, idd3, Croatia, pp. 6039-6067

Fabrication, optimization, and characterization of natural rubber-based composite board reinforced with buffing dust, wastepaper, and peanut shell

Md. Mamdudur Rahman Chowdhury, Umme Habiba Bodrun Naher, Shimul Chakma. Md. Arafat Hossain and Mohammad Al Shahriar Khan

Sustainable Chemistry One World,volume: 10,pages: ,(2026,doi:, vol. 10, pp. 100224

Extraction of Cellulose Nanocrystals from Nypa fruticans and Their Reinforcement Effect in PVC–Leather Waste Composites.

Islam M, Tabassum N, Shabur M, Naher U, Mottalib M.

Textile & Leather Review, vol. 9, pp. 6039-6067

Industrial Robotics From Industry 4.0 to Industry 5.0: An Analysis of Architectures, Human-Centricity and Sustainability

Md. Abdus Shabur

IET Collaborative Intelligent Manufacturing, vol. 8, no. 1, pp. e70064

Digital steel heat treatment design integrating transformation kinetics microstructure architecture and prescriptive digital twins

Md Abdus Shabur

Discover Materials, Springer

Bio-architectural reinforcements in polymer composites: a comprehensive review of animal fiber--based materials, interfaces, and applications

Md Farhad Ali and Md Abdus Shabur

Polymer Bulletin, vol. 83, no. 8, Springer, pp. 427

Material Selection and Fiber Orientation Effects in Composite Overwrapped Steel Pipelines: A Numerical Study for Burst Pressure Enhancement

Samudra Jit Saha, Marufa Akter, Nowreen Jahan, Sayma Islam, Abid Chowdhury and Md Abdus Shabur

Journal of Sustainable Smart Materials and Structural Systems, vol. 2, pp. 61--74

Performance assessment of medical waste incineration ash as partial cement replacement in concrete: Bangladesh perspective

Md Shah Alam Sarker, Salman Mahamud, Pial Barua, Abhi Chowdhury, Md Jillur Rahman, Md Abdus Shabur, Md Saiful Islam and Md Moinul Islam

Scientific Reports, Nature Publishing Group UK London

Tannery solid waste generation trend and sustainable management techniques for commercialization

Debanjon Sarker, Saidur Rahman Shakil, Nazmul Huda, Hridoy Roy, Manjushree Chowdhury and Md. Shahinoor Islam

RSC Advances, vol. 16, no. 18123, Royal Society of Chemistry, pp. 18123–18143

A systematic review of anaerobic digestion for sustainable valorization of tannery sludge: Process strategies, mechanistic insights, and emerging frontiers

Md. Amjad Hossain, Miah Mohammad Zinnah and Osama Eljamal

Next Energy, vol. 12, Elsevier, pp. 100656

Sustainable Biocomposite from Leather Solid Waste and Plant Fibers: A Circular Economy and Life Cycle Decision Support Approach

Mysha Maliha, Sonia Akter, Md. Abdul Moktadir, Zafar Said, Md. Aowlad Hossain and Krishna Kumar Yadav

Materials Circular Economy, vol. 8, Springer nature

Development of lightweight, environmentally friendly bricks using leather shaving and buffing dust waste

Moklasur Rahman Mithu, Md. Ariful Islam, Md. Abdul Mottalib, Imdadul Haque and Md. Abdul Goni

Scientific Reports, vol. 16, no. 1, Springer Nature

Development of lightweight, environmentally friendly bricks using leather shaving and buffing dust waste

M. R. Mithu, M. A. Islam, M. A. Mottalib, I. Haque and M. A. Goni

Scientific Reports, vol. 16, Springer, pp. 12394

Development of latex-based sustainable composites reinforced with leather trimming dust and ZnO nanoparticles for antibacterial shoe insole application: A circularity approach

Md. Ariful Islam, Papia Haque and Mohammed Mizanur Rahman

Circular Economy, vol. 5, no. 1, Elsevier

Collagen-based composite films as sustainable food packaging material: A review

Mysha Maliha and Taslim Ur Rashid

Trends in Food Science & Technology, vol. 171, Elsevier, pp. 105642

Innovative use of tannery solid waste and jute fiber in sustainable leather composites for footwear in Bangladesh

M. C. Dhar, S. R. Shakil, M. A. Hossain, M. A. Shabur, U. H. Nila and M. A. Mottalib

Journal of Material Cycles and Waste Management, vol. 28, no. 2, Springer

Water Resources and Environmental Sustainability: Current Challenges and Future Perspectives

Samia Rahman Moon, Md. Mahbubur Rahman, Aminur Rahman, Aftab Ahmad Khan, Muhammad Altaf Nazir, Md. Ariful Islam and Md. Abdulla-Al-Mamun

Resources, vol. 15, no. 2, MDPI, pp. 31

Water quality and pollution dynamics in the Padma River, Bangladesh: Characterization of microbiological and chemical contaminants.

Mohammad Kamruzzaman, Sharmin Zaman Emon, Md. Nayeem, Anowar Hosen, Mohammad Ismail, Asma Rahman, Md Firoz Khan, Muhammad Nurul Huda.

Regional Studies in Marine Science, vol. 93, pp. 104695

Innovative use of tannery solid waste and jute fiber in sustainable leather composites for footwear in Bangladesh

Mohon Chandra Dhar, Saidur Rahman Shakil, Md. Amjad Hossain, Md. Abdus Shabur and Md. Abdul Mottalib

Journal of Material Cycles and Waste Management, vol. 28, no. 1, Springer Nature

Bio-Based Antimicrobial Nanocomposites Derived from Tannery Waste for Functional Leather Coating: Circular Valorization of Chrome Shaving Dust

Sharmin Akter Liza, Md. Abdulla-Al-Mamun, Md. Nazmul Islam, Md. Rezaul Karim Rana and Md. Shariful Islam

Materials Advances, vol. 7, Royal Society of Chemistry, pp. 2390-2409

Innovative use of tannery solid waste and jute fiber in sustainable leather composites for footwear in Bangladesh

Mohon Chandra Dhar, Saidur Rahman Shakil, Md. Amjad Hossain, Md. Abdus Shabur, Umme Habiba Nila and Md. Abdul Mottalib

Journal of Material Cycles and Waste Management, Springer Nature, pp. 1-19

U3O8 nanoparticles from uranyl-amino acid complexes: Morphology, oxidation properties, and photocatalytic degradation of oxytetracycline

Sumiya Ahsan, Saiful Islam, S.M. Mahfuzul Islam, Md. Amjad Hossain, Hasina Akhter Simol, Umme Sarmeen Akhtar, Pradip K. Bakshi and M.Q. Ehsan

Inorganic Chemistry Communications, vol. 183, Elsevier, pp. 115838

Innovative use of tannery solid waste and jute fiber in sustainable leather composites for footwear in Bangladesh

Mohon Chandra Dhar, Saidur Rahman Shakil, Md. Amjad Hossain, Md. Abdus Shabur, Umme Habiba Nila and Md. Abdul Mottalib

Journal of Material Cycles and Waste Management, vol. 28, Springer Nature, pp. 1339–1357

Unhairing of goatskin using crude protease enzyme from Alcaligenaceae sp. to reduce chemical usage and wastewater pollution

Fatema Tujjohra, Md Samaul Alam, Sumaiya Mim, Papia Haque, Ramisa Farjana Megumi and Mohammed Mizanur Rahman

Next Bioengineering, vol. 3, Elsevier, pp. 100043

Design & Analysis of an IoT Based Liquid Flow Control & Quality Monitoring System

Md. Abdus Shabur and Md. Asif Al Arafat

In Intelligent Networks and Systems, Chapman and Hall/CRC, pp. 134-147

Analysing the Problems of Typical Building Management System in Bangladesh: An Approach to IoT Based Automated Building Management

Mitu Shikder, Tasnuva Jahan Nuva and Md. Abdus Shabur

In Intelligent Networks and Systems, Chapman and Hall/CRC, pp. 75-88

Toward Smart and Autonomous Surface Quality Prediction: A Review of AI-Driven Approaches

Abdus Shabur and Md Jisan Mahmud

Journal of Sustainable Smart Materials and Structural Systems, vol. 1, pp. 71--87

Sustainable leather tanning: Evaluation of Aphanamixis polystachya extract as an eco-friendly alternative to conventional tanning agents

Md. Mojaharul Islam, Sumaiya Mim, Umme Habiba Bodrun Naher and Md. Abdul Mottalib

Sustainable Chemistry One World, vol. 8, Elsevier

Sustainable Leather Tanning: Evaluation of Aphanamixis polystachya Extract as an Eco-friendly Alternative to Conventional Tanning Agents.

M. M. Islam, S. Mim, U. H. Bodrun Naher and M. A. Mottalib

Sustainable Chemistry One World, vol. 8, Elsevier, pp. 100114

Extraction and application of Pangas fish waste oil as a sustainable leather fatliquor

UmmeHabiba Bodrun Naher, Mohammad Al Shahriar Khan, Sumiya, Afrin Rahman Akhi and Kawsar Akhtar

Environmental Science and Pollution Research, Springer

Sustainable Leather Tanning: Evaluation of Aphanamixis polystachya Extract as an Eco-friendly Alternative to Conventional Tanning Agents.

Md. Mojaharul Islam, Sumaiya Mim , Umme Habiba Bodrun Naher*, Md. Abdul Mottalib

Sustainable Chemistry One World. Volume 8, 2025, 100114, vol. 8, pp. 100114

Sustainable valorization of textile industry cotton waste through pyrolysis for biochar production

Fatema Tujjohra, Ehsanul Hoque, Md Abdul Kader and Mohammed Mizanur Rahman

Cleaner Chemical Engineering, vol. 11, Elsevier, pp. 100161

Extraction and application of Pangas fish waste oil as a sustainable leather fatliquor

Umme Habiba Bodrun Naher # 1, Mohammad Al Shahriar Khan # 2, Sumiya 2, Afrin Rahman Akhi 2, Kawsar Akhtar 2

Environ Sci Pollut Res Int, vol. 32, no. 57, pp. 30944-30957

Fire-Safe Switchboard From Epoxy Composites Reinforced With Shaving and Buffing Dust for Waste Valorization

Fatema Akter, Saidur Rahman Shakil, Md. Abdulla-Al-Mamun, Rezoanul Haque, Mst. Koraimatun Sumrin Chowdhury and Estehad Pathan

SPE Polymers, vol. 7, no. 1, Wiley, pp. e70033

Fire-Safe Switchboard From Epoxy Composites Reinforced With Shaving and Buffing Dust for Waste Valorization

Fatema Akter, Saidur Rahman Shakil, Md. Abdulla-Al-Mamun, Rezoanul Haque, Mst. Koraimatun Sumrin Chowdhury and Estehad Pathan

SPE Polymers, vol. 7, no. 1, Wiley

Fabrication of waste natural fiber reinforced epoxy resin-based composite and evaluation of diverse environmental interactions

Md. Farhad Ali and Kazi Imtiaz Ahmed Nakib , Ridwanur Rahman , Israt Jahan Lithi , Mayesha Samiha Oishi

Journal of Environmental Chemical Engineering, vol. 13, no. 6, ELSEVIER

Prioritizing critical factors for leather waste management in Bangladesh: an ISM-MICMAC and best–worst method approach

M. A. Shabur, N. Jahan and M. A. Mottalib

Scientific Reports, vol. 15, no. 1, Springer

Prioritizing critical factors for leather waste management in Bangladesh: an ISM-MICMAC and best--worst method approach

Md Abdus Shabur, Nusrat Jahan and Md Abdul Mottalib

Scientific Reports, vol. 15, no. 1, Nature Publishing Group UK London, pp. 41115

Evaluation of combination tanning as a sustainable alternative to chrome tanning for shoe upper leather production

Samia Akter # , Mohammad Al Shahriar Khan # , Umme Habiba Bodrun Naher *

South African Journal of Chemical Engineering, vol. 55, pp. 180-190

A hybrid genetic algorithm for simultaneous delivery and pickup vehicle routing problem with time window in green perspective

Mst Anjuman Ara, Ferdous Sarwar and Md Tanvir Ahmed

International Journal of Logistics Systems and Management, vol. 52, no. 1, Inderscience Enterprises Ltd, pp. 130--148

Eco-friendly fabrication of biopolymer films from tannery waste, zinc oxide nanoparticles, and crustacean shells: Advancing sustainable circular bio-economy

Md. Farhad Ali and Samiha Suchit Neela , Rupok Kumar Nayak , Mohammad Ashraful Islam , Md. Delwar Hossain

Results in Chemistry, vol. 18, ELSEVIER

Sustainable collagen-based packaging material from leather waste: green chemistry solution towards the development of zero waste disposal system

Mysha Maliha

IN THE CHEMICAL SCIENCES FOR SUSTAINABILITY, The International Organization for Chemical Sciences in Development (IOCD), pp. 76

Preparation of biodegradable plastic mulch from tannery raw trimming waste for sustainable agroecosystem

Sadia Afrose Esha, Fatema Tujjohra, Md. Harunor Rashid Khan and Mohammed Mizanur Rahman

Next Materials, vol. 9, Elsevier, pp. 101244

Preparation and characterization of eco-friendly polymer composites from leather wastes

Md. Farhad Ali and Sanjida Khan , Md. Sahadat Hossain , Mohammad Al Shahriar Khan, Afrin Rahman Akhi a ,

South African Journal of Chemical Engineering, vol. 38, ELSEVIER, pp. 461-469

Ecofriendly degreasing of sheep skins by crude lipase enzyme from Bacillus toyonensis: Preparation of crust leather with enhanced properties

Fatema Tujjohra, Muhaimin Alam, Md Jawad Hasan, Mohammad Shahruzzaman and Mohammed Mizanur Rahman

Bioresource Technology Reports, vol. 31, Elsevier, pp. 102221

Ecofriendly degreasing of sheep skins by crude lipase enzyme from Bacillus toyonensis: Preparation of crust leather with enhanced properties

Fatema Tujjohra, Muhaimin Alam, Md. Jawad Hasan, Mohammad Shahruzzaman and Mohammed Mizanur Rahman

Bioresource Technology Reports, vol. 31, no. September, 2025, Elsevier, pp. 102221

In-depth crystallographic structure and optoelectrical properties of ZnO nanoparticles synthesized by a facile precipitation method

Nadim Munna, Mohammad Shah Jamal, Ajadur Rahman Shakil, Abdur Rahim, Mohammad Kamruzzaman

Next Materials

A hybrid AHP and statistical validation approach for sustainable supplier selection in apparel industry

Mst Anjuman Ara, Mst Sadia Tamanna, Muhammad Ali, Al Amin and Md Abdus Shabur

Discover Sustainability, vol. 6, no. 1, Springer, pp. 1--25

Functionalization of halloysite nanotubes as remediation agents for organic and inorganic contaminants: Insights into synthesis routes, removal techniques, and eco-friendly perspectives

Amal Kanti Deb

Science of the Total Environment

Development adsorbents derived from waste peels in chromium (III) removal: a comparative study

Barista Chakma, Adib H. Chisty and Ishtiaq Ahmed Jawad

Journal of the Iranian Chemical Society, vol. 22, no. 6

A hybrid AHP and statistical validation approach for sustainable supplier selection in apparel industry

Mst Anjuman Ara, Mst Tamanna Sadia, Muhammad Ali, Al Amin and Md Abdus Shabur

Discover Sustainability, vol. 6, no. 1, Springer, pp. 1--25

Microbial Degradation of Tannery Chrome-Solid Waste using Bacillus thuringiensis: Optimization of Collagen Hydrolysate Extraction via Response Surface Methodology

Sharmin Akter Liza and Md. Abdulla-Al-Mamun

RSC Sustainability, vol. 3, no. 7, Royal Society of Chemistry, pp. 3198 - 3214

Valorization of hazardous leather shaving dust for the fabrication of electrospun collagen/PVA/chitosan nanomats in wound care

Fatema Tujjohra, Md Mazharul Islam, Taslim Ur Rashid and Mohammed Mizanur Rahman

Carbohydrate Polymer Technologies and Applications, vol. 10, Elsevier, pp. 100748

Sustainable supplier selection in the textile industry using triple bottom line and SWARA-TOPSIS approaches

Sanjucta Saha Sithi, Mst. Anjuman Ara, Ahnaf Tahmid Dhrubo, Abid Hasan Rony and Md Abdus Shabur

Discover Sustainability, vol. 6, no. 1, Springer, pp. 1--23

From automation to collaboration: exploring the impact of industry 5.0 on sustainable manufacturing

Md Abdus Shabur, Abid Shahriar and Mst. Anjuman Ara

Discover Sustainability, vol. 6, no. 1, Springer, pp. 1--23

Sustainable supplier selection in the textile industry using triple bottom line and SWARA-TOPSIS approaches

Sanjucta Saha Sithi, Mst Anjuman Ara, Ahnaf Tahmid Dhrubo, Abid Hasan Rony, Md Abdus Shabur and others

Discover Sustainability, vol. 6, no. 1, Springer, pp. 1--23

From automation to collaboration: exploring the impact of industry 5.0 on sustainable manufacturing

Md Abdus Shabur, Abid Shahriar, Mst Anjuman Ara and others

Discover Sustainability, vol. 6, no. 1, Springer, pp. 1--23

Analyzing the socio-economic factors of adolescent malnutrition in Bangladesh using Best Worst Method

Tanzim Redwan and Md Abdus Shabur

Discover Sustainability, vol. 6, no. 1, Springer, pp. 1--16

Preparation and Characterization of Ethylene Vinyl Acetate‑Based Composites from Footwear Scraps and Peanut Fiber for Value‑Added Products

Saidur Rahman Shakil, Most. Nilufa Yeasmin, S. M. R. Asif and Md. Abdul Mottalib

Fibers and Polymers, vol. 26, no. 4, Springer, pp. 1875-0052

Transforming leather waste into NPK fertilizers: A sustainable approach to boosting malabar spinach (Basella alba) growth

Farhana Sharmin, Md Abu Sayid Mia, Sumaiya Mim, Mustafizur Rahman Naim and Umme Habiba Bodrun Naher

Biocatalysis and Agricultural Biotechnology, vol. 65, Elsevier

Productivity Improvement of Garments Industry by Implementing Line Balancing Algorithms—A Case Study

Mst. Anjuman Ara, Nafisa Anjum, Dilir Ahbab, Mushfica Takia Sidiika and Risat Rimi Chowdhury

Engineering Reports, vol. 7, no. 4, Wiley, pp. e70125

Preparation and Characterization of Ethylene Vinyl Acetate Based Composites from Footwear Scraps and Peanut Fiber for Value Added Products

S. R. Shakil, M. N. Yeasmin, S. M. R. Asif, U. H. Nila and M. A. Mottalib

Fibers and Polymers, vol. 26, Springer, pp. 2159–2174

Transforming leather waste into NPK fertilizers: A sustainable approach to boosting malabar spinach (Basella alba) growth

Farhana Sharmin, Md Abu Sayid Mia, Sumaiya Mim, Mustafizur Rahman Naim, Umme Habiba Bodrun Naher

Biocatalysis and Agricultural Biotechnology, vol. 65, pp. 103529

Utilization of chromium tanned leather waste in cementitious and gypsum composites for sustainable construction materials

Mehjabin Litu, Md Farhad Ali, Md Abdus Shabur, Mantaka Taimullah and Faisal Mahmud Arnob

Discover Sustainability, vol. 6, no. 1, Springer, pp. 192

A Facile Approach for Enhanced Keratin Extraction from Tannery Hair Waste Using Crude Protease Enzyme and Optimization of Hydrolysis Parameters by Response Surface Methodology

Rabeya Sultana, Taslim Ur Rashid, Md. Jawad Hasan and Mohammed Mizanur Rahman

ACS Sustainable Resource Management, vol. 3, no. 2, American Chemical Society (ACS), pp. 391–401

BWM analysis of online and offline learning effectiveness in Bangladesh

Syeda Sharaban Tahura, Md Abdus Shabur and Tasnuva Jahan Nuva

Scientific Reports, vol. 15, no. 1, Nature Publishing Group UK London, pp. 8377

Assessing the success of Education 4.0 in enhancing English proficiency for engineering students in Bangladesh

Md. Abdus Shabur, Jafrin Jahan and Protik Barua

Discover Education, vol. 4, no. 1, Springer Nature, pp. 61

Evaluating the online and offline learning effectiveness in Bangladesh using Analytic Hierarchy Process

Syeda Sharaban Tahura, Md. Abdus Shabur and Tasnuva Jahan Nuva

Discover Sustainability, vol. 6, no. 1, Springer Nature, pp. 84

Efficient Cr(III) removal from effluent using functionalized Ficus benghalensis and Bambusa vulgaris bio-adsorbents. Chemical Engineering Science

M. Haque, M. S. Rahman Shakil, M. Abdulla-Al-Mamun, P. I. Turzo, M. A. Mottalib, M. Hakim, D. Islam

Chemical Engineering Science, vol. 302, no. 3, ScienceDirect, pp. 120905

Comparative immobilization of 30 PFAS mixtures onto biochar, clay, nanoparticle, and polymer derived engineered adsorbents: Machine learning insights into carbon chain length and removal mechanism

Amal Kanti Deb

Journal of Hazardous Materials

Green Curing Solutions for Leather: Valorizing Biomass as Sodium Chloride Alternatives

Md. Abu Jafor Siddiki, Md. Jawad Hasan, Uttam Kumar Roy and Md. Mokarom Hossain

Springer Journals

Fabrication of Printed Luminescent Finished Leather using Cu-doped ZnS: A Versatile and Luxurious Innovation

Md. Abdulla-Al-Mamun and Masrafe Bin Imran

8th International Conference on Mechanical, Industrial and Energy Engineering 2024, Khulna: SciEn, pp. 7-12

Nanotechnology in Leather Manufacturing

Mahabubur Rahman Khan, Saidur Rahman Shakil, Bart Vorselaars, Mahfuzur Rahman, Ishtiaq Ahmed Jawad and Waqar Ahmed

Springer

Sustainable Chrome Tanning by Crude Protease Enzymes: Enhanced Chemical Uptake and Reduction of Effluent Load

Md. Samaul Alam,, Md. Jawad Hasan, Dr. Papia Haque and Dr. Mohammed Mizanur Rahman

Dhaka: Department of Patents, Industrial Designs and Trademarks, Ministry of Industries, 91, Motijheel ClA, Dhaka-1000

Preparation and Characterization of New Biodegradable Packaging Materials Based on Gelatin Extracted from Tenualosa ilisha Fish Scales with Cellulose Nanocrystals.

M. A. Mottalib, M. H. Islam, M. C. Dhar, K. Akhtar and M. A. Goni

ACS Omega, vol. 9, no. 52, American Chemical Society, pp. 51175–51190

Bio-preservation using onion and lemon peel biomass: a cleaner leather processing alternative

Tamish Mobash Shira Urmi, Md. Jawad Hasan and Mahfujur Rahman

Biomass Conversion and Biorefinery, vol. 15, Springer Nature, pp. 18947–18962

Preparation and Characterization of New Biodegradable Packaging Materials Based on Gelatin Extracted from Tenualosa ilisha Fish Scales with Cellulose Nanocrystals

Md. Abdul Mottalib, Md. Hasan Islam, Mohon Chandra Dhar, Kawsar Akhtar and Md. Abdul Goni

ACS Omega, American Chemical Society

Optimizing extraction of collagen from hazardous leather shaving dusts by crude protease enzyme: Chrome recovery and reuse for leather rechroming

Fatema Tujjohra and Mohammed Mizanur Rahman

Bioresource Technology Reports, vol. 28, Elsevier, pp. 101995

A circular economy approach for utilization of tannery fleshing hydrolysate and kitchen wastes into organic fertilizer through enzymatic decomposition

Md Mazharul Islam, Fatema Tujjohra, Uttam K Roy and Mohammed Mizanur Rahman

Biochemical Engineering Journal, vol. 212, Elsevier, pp. 109519

Assessing the Obstacles to Green Supply Chain Management in Bangladesh's Footwear Industry using SWARA and ISM-MICMAC Methods

Mst. Anjuman Ara, Mafia Sultana, Sadia Sultana Mou, Md. Sadman Azim Sakib and Md. Abdus Shabur

Discover Sustainability, vol. 5, Springer Nature

Analyzing the challenges and opportunities in developing a sustainable digital economy

Md. Abdus Shabur

Discover Applied Sciences, vol. 6, no. 12, Springer, pp. 1--23

Assessing the obstacles to green supply chain management in Bangladesh's footwear industry using SWARA and ISM-MICMAC methods

Mst Ara, Mafia Sultana, Sadia Sultana Mou, Md Sadman Azim Sakib and Md. Abdus Shabur

Discover Sustainability, vol. 5, no. 1, Springer, pp. 1--20

Efficient Cr(III) removal from effluent using functionalized Ficus benghalensis and Bambusa vulgaris bio-adsorbents

Maream Haque, Saidur Rahman Shakil, Md. Abdulla-Al-Mamun, Plabon Islam Turzo and Md. Abdul Mottalib

Chemical Engineering Science, vol. 302, no. 2025, Elsevier

Circular product design strategies in the apparel industry: toward the circular economy

Sanjida Parvin Rahee and Md Rayhan Sarker

Discover Sustainability, Springer

Efficient Cr(III) Removal from Effluent Using Functionalized Ficus benghalensis and Bambusa vulgaris Bio-adsorbents

Maream Haque, Saidur Rahman Shakil, Md. Abdulla-Al-Mamun, Plabon Islam Turzo, Md. Abdul Mottalib, Mahmuda Hakim and Dipa Islam

Chemical Engineering Science, vol. 302, Elsevier, pp. 120905

Green nanotechnology for the enhancement of antibacterial properties in lining leather: MgO-chitosan nanocomposite coating

Sobur Ahmed, Sajib Sarker Imon, Md Jawad Hasan and Md Samaul Alam

Heliyon, vol. 10, no. 20, Cell Press (Elsevier), pp. e39170

A circular economy approach for utilization of tannery fleshing hydrolysate and kitchen wastes into organic fertilizer through enzymatic decomposition.

Md. Mazharul Islam, Fatema Tujjohra, Uttam K. Roy and Mohammed Mizanur Rahman

Biochemical Engineering Journal, vol. 212

Green nanotechnology for the enhancement of antibacterial properties in lining leather: MgO-chitosan nanocomposite coating

Sobur Ahmed, Sajib Sarker Imon, Md Jawad Hasan and Md Samaul Alam

Heliyon, vol. Heliyon 10 (2024) e39170, Elsevier, pp. 2405-8440

Fabrication of Collagen-Sodium Alginate based Antibacterial and Edible Packaging Material: Performance Evaluation Using Entropy-Combined Compromise Solution (CoCoSo)

Mysha Maliha, Taslim Ur Rashid and Mohammed Mizanur Rahman

Carbohydrate Polymer Technologies and Applications, vol. 8, Elsevier, pp. 100582

Radioactivity Levels, Spatial Distribution, and Radiological Risk Assessment of 226Ra, 228Ra, 40K, and 3H in Water Samples from Dhaka City and Savar, Bangladesh

Md. Ishmum Chowdhury, Md. Saiful Islam, Md. Amjad Hossain, Jannatul Ferdous and Pradip K. Bakshi

ACS Omega, vol. 9, no. 40, American Chemical Society, pp. 41236-41249

Development of a footwear sizing system for diabetic feet

Bibhu Dash, Md. Rayhan Sarker, Md. Mukter Alam, Asack Mamun Asick and Aklima Begum

Heliyon, vol. 10, no. 18, Elsevier

Circular economy strategies: a fuzzy DEMATEL decision framework for the fast fashion footwear manufacture

Md. Rayhan Sarker, Mazharul Islam, U. Aung Shine Marma, Md. Mukter Alam, Md. Abdus Shabur and Md Saifur Rahman

Discover Sustainability, vol. 5, Springer

Protein-Based Polymeric Metal–Nanocomposite Derived From Egg Albumin: A Highly Effective Antimicrobial Agent Against Bacteria

A. T. M. Mahbub Alahe, Sharmin Akter Liza, Rajan Kumar Raha and Md. Abdulla-Al-Mamun

Applied Organometallic Chemistry, vol. 39, no. 1, Wiley and sons, pp. e7780

Dye Removal from Tannery Wastewater Utilizing Footwear Waste: A Sustainable Approach

Saidur Rahman Shakil, Adhir Chandra Paul, Md. Abdulla-Al-Mamun, Sainik Roy Thirtho and Mustafizur Rahman Naim

Environmental Quality Management, vol. 34, no. 1, Wiley, pp. e22310

Application and valorization of novel indigenous Azadirachta indica leaf in leather processing

Saidur Rahman Shakil and Fatema Tuz Johura Zenith , Mahabubur Rahman Khan , Waliur Rahman Tonay

Heliyon, vol. 10, no. 17, Elsevier

The potential and implications of artificial intelligence in Bangladesh’s early career planning education

Md Abdus Shabur

Discover Global Society, vol. 2, no. 1, Springer, pp. 1--11

Gamma radiation’s influence on the tensile characteristics of waste animal fiber reinforced biocomposites

Md. Farhad Ali, Md. Abdus Shabur and SM Sarwaruddin Chowdhury

Discover Materials, vol. 4, no. 1, Springer, pp. 1--16

Synthesis and Characterization of Nano-Crystallite Triple Super Phosphate (TSP) from Marine Mollusk Waste: Babylonia japonica, Oliva sayana, and Conasprella bermudensis

Md. Farhad Ali and Md. Kawsar, Md. Sahadat Hossain, Sumaiya Akter,

ChemistryOpen, John Wiley & Sons Inc.

Gamma radiation’s influence on the tensile characteristics of waste animal fiber reinforced biocomposites

Md. Farhad Ali and Md. Abdus Shabur & A. M. Sarwaruddin Chowdhury

Discover Materials, vol. 4, Springer Open

Dye Removal From TanneryWastewater Utilizing Footwear Waste: A Sustainable Approach

Saidur Rahman Shakil and Adhir Chandra Paul, Md. Abdulla-Al-Mamun, Sainik Roy Thirtho, Mustafizur Rahman Naim

Environmental Quality Management RESEARCH, vol. 34, no. 1, Wiley

Comparison of the mechanical characteristics of biocomposites of unsaturated polyester resin with cellulose extracted from corn silk and treated corn silk

Md Farhad Ali, Md Abdus Shabur and GM Safiur Rahman

Discover Mechanical Engineering, vol. 3, no. 1, Springer, pp. 18

Md. Abdul Kader, Md. Shahruzzaman, Nehar Parvin, Kashfia Shams, Mohammad Kamruzzaman, Papia Haque and Mubarak A. Khan. Development of biocompatible packaging material: starch/PVA-based bio-composite enhanced with hydroxypropyl methylcellulose. Polymer-Plastics Technology and Materials. July 2024, 1-15.

Mohammad Kamruzzaman

Polymer-Plastics Technology and Materials, pp. 1-15

Analysis of the barriers and possible approaches for adopting Industry 4.0 in the fertilizer sector of Bangladesh

Md. Abdus Shabur1 · Md. Farhad Ali1 · Md. Mukter Alam1

Discover Applied Sciences, vol. 6, Springer open

Developing a hybrid genetic algorithm in a vehicle routing problem with simultaneous delivery and pickup with time windows: optimising fuel consumption

Nilufa Yeasmin, Sultana Parveen and Anjuman Ara

European Journal of Industrial Engineering, vol. 18, no. 4, Inderscience Publishers (IEL), pp. 537--556

Analysis of the barriers and possible approaches for adopting Industry 4.0 in the fertilizer sector of Bangladesh

Md. Abdus Shabur, Md. Farhad Ali and Md. Mukter Alam

Discover Applied Sciences, vol. 6, no. 7, Springer, pp. 369

Removal of Lead Using Novel Composite Synthesized from Rice Husk and Used Tea Leaves Extract

Md. Mukter Alam, Azmira Sultana, Md. Rayhan Sarker , Md. Delwar Hossain, and Md. Abdul Jabbar

Textile & Leather Review, vol. 7, idd3, Croatia, pp. 1118-1142

Preparation of Nontoxic Biodegradable Packaging Materials from Hazardous Leather Shaving Dusts Using Poly(Vinyl Alcohol)

Sumaiya Mim, Kawsar Akhtar, Fatema Tujjohra and Mohammed Mizanur Rahman

ACS Sustainable Resource Management, vol. 1, no. 7, American Chemical Society, pp. 1350-1362

Perspectives and possibilities for developing ride-sharing services to promote sustainable mode of transport: Bangladesh perspective

Md. Abdus Shabur and Dr. Md. Farhad Ali

Heliyon, vol. 10, no. 12, Elsevier

Removal of Lead Using Novel Composite Synthesized from Rice Husk and Used Tea Leaves Extract

Md. Mukter Alam, Azmira Sultana, Md. Rayhan Sarker, Md. Delwar Hossain and Md. Abdul Jabbar

Textile & Leather Review, vol. 7, iddr3, pp. 1118-1142

Mesoporous architectural magnetic halloysite-polymer beads for removing toxic streptomycin from water: A sustainable remediation approach

Amal Kanti Deb, Mohammad Mahmudur Rahman, Bhabananda Biswas, Yunfei Xi, Md. Rashidul Islam, Masud Hassan and Ravi Naidu

Groundwater for sustainable development, Elsevier, pp. 1-12

Preparation of Nontoxic Biodegradable Packaging Materials from Hazardous Leather Shaving Dusts Using Poly (Vinyl Alcohol)

Sumaiya Mim, Kawsar Akhtar, Fatema Tujjohra and Mohammed Mizanur Rahman

ACS Sustainable Resource Management, ACS Publications

Preparation of Nontoxic Biodegradable Packaging Materials from Hazardous Leather Shaving Dusts Using Poly(Vinyl Alcohol)

Sumaiya Mim, Kawsar Akhtar, Fatema Tujjohra and Mohammed Mizanur Rahman

ACS Sustainable Resource Management, vol. 1, ACS Publications

Perspectives and possibilities for developing ride-sharing services to promote sustainable mode of transport: Bangladesh perspective

Md. Abdus Shabur , Md. Farhad Ali

Heliyon, vol. 10, no. 12, Cell press

A study of biodegradation, water uptake and thickness swelling of animal fibers reinforced unsaturated polyester resin composites

Md. Farhad Ali and Md. Sahadat Hossain , Samina Ahmed , A.M. Sarwaruddin Chowdhury

Results in Chemistry, vol. 8, Elsevier

Efficient Cr(III) removal from effluent using functionalized Ficus benghalensis and Bambusa vulgaris bio-adsorbents. Chemical Engineering Science

M. A. Mottalib, D. Islam., P. I. Turzo, S. R. Shakil, M. Haque, M. Abdulla-Al-Mamun and M. Hakim

Textile & Leather Review, vol. 7, idd3, Croatia, pp. 738-769

Mechanical properties of Kenaf and Palmyra Palm leaf stalk fiber reinforced composite

Mahfuzur Rahman, Md. Naimur Islam, Mst. Anjuman Ara, M Ahasan Habib and Md Mahadi Hassan Parvez

Results in Surfaces and Interfaces, vol. 15, Elsevier

A New Synthesis Method and Characterization of Graphene Oxide Nanocomposites for the Leather Tanning Process.

S. Chakma, P. Biswas, M. Abdulla-Al-Mamun, M. A. Mottalib, F. Chowdhury and M. A Goni.

Textile and Leather Review, vol. 7, pp. 738-769

A comprehensive review on the impact of Industry 4.0 on the development of a sustainable environment

Md. Abdus Shabur

Discover Sustainability, vol. 5, no. 1, Springer, pp. 97

Optimization of batch process parameters for chromium (VI) removal from synthetic wastewater using eggshell–clay composite

Talukder, P., Sultana, R., Naim, M.R., Turzo P. I., Naher U.H.B.

Discov Appl Sci, vol. 6

Simultaneous Removal of Cadmium and Disperse Black-9 Dye Using Chemically Modified Rice Husk-Derived Activated Carbon

Md. Mukter Alam, Azmira Sultana, Md. Abdul Jabbar

Textile & Leather Review, vol. 7, idd3, Croatia, pp. 806-830

A New Synthesis Method and Characterization of Graphene Oxide Nanocomposites for the Leather Tanning Process

Shimul Chakma, Pronay Biswas, Md. Abdulla-Al-Mamun, Md. Abdul Mottalib, Fariha Chowdhury and Md. Abdul Goni

Textile & Leather Review, vol. 7, idd3, Croatia, pp. 738-769

A new visible-light-responsive carbon–nitrogen-co-doped zinc oxide photocatalysts: Applications on dye remediation

Raymond Shikuku and Md. Abdulla-Al-Mamun

MRS Advances, vol. 9, Springer, pp. 1015-1022

Characterization and application of synthesized calcium alginate-graphene oxide for the removal of Cr3+, Cu2+ and Cd2+ ions from tannery effluents

Sobur Ahmed, Tasrina Rabia Choudhury, Md. Zahangir Alam and Mohammad Nurnabi

Cleaner Water, Elsevier, vol. 1, Elsevier, pp. 100016

Synthesis and characterization of nano-cellulose from Slender amaranth and its application as an eco-friendly reinforcement material in synthetic leather preparation from leather scraps wastes

M. A. Mottalib, M. A. Goni, Z. Adnan, M. C. Dhar, M. Tauhiduzzaman, M. A. A. Shaikh and M. R. Naim

Polymer Bulletin, vol. 81, Springer, pp. 9363-9388

Sustainable leather tanning: Enhanced properties and pollution reduction through crude protease enzyme treatment

Md. Samaul Alam, Md. Jawad Hasan, Papia Haque and Mohammed Mizanur Rahman

International Journal of Biological Macromolecules, vol. 268, Elsevier, pp. 131858

Treatment of tannery wastewater by different membrane bioreactors: a critical review

Md Abdul Moktadir, Mysha Maliha, Sanjana A Munmun, Samaul Alam, Md Ariful Islam and Mohammed Mizanur Rahman

Environmental Advances, vol. 15, Elsevier

Treatment of tannery wastewater by different membrane bioreactors: a critical review

Md Abdul Moktadir, Mysha Maliha, Fatema Tujjohra, Sajneen A Munmun, Md. Samaul Alam, Md Ariful Islam and Mohammed Mizanur Rahman

Environmental Advances, vol. 15, Elsevier, pp. 100478

Synthesis of gamma irradiated acrylic acid-grafted-sawdust (SD-g-AAc) for trivalent chromium adsorption from aqueous solution

Sobur Ahmed, Abrar Shahria, Nazia Rahman, Md. Zahangir Alam and Mohammad Nurnabi

Journal of Hazardous Materials Advances, vol. 14, Elsevier, pp. 100427

Fabrication and synergistically enhanced photocatalytic activity of ternary kaolinite, TiO2, and Al2O3 (K65T30A5) nanocomposite for visible-light-induced degradation of methylene blue and remazol red dye

Nadira Parvin Lata, Md. Sheum Hussain, Md. Abdulla-Al-Mamun, Taslim Ur Rashid and Sayed Md. Shamsuddin

Heliyon, vol. 10, no. 8, Elsevier Ltd., pp. e29255

RECENT DEVELOPMENTS IN ENVIRONMENT-FRIENDLY METHODS FOR VALUING LEATHER WASTE AS A MEANS OF PROMOTING THE CIRCULAR ECONOMY: A COMPREHENSIVE REVIEW.

Md. Abdus Shabur and Md. Amjad Hossain

Leather and Footwear Journal, vol. 24, no. 1, Revista de Pielarie Incaltaminte, pp. 51

Improving changeover techniques in apparel manufacturing through single minute exchange of die: implications for benchmarking

Syed Mithun Ali, Muhammad Najmul Haque, Md. Rayhan Sarker, Jayakrishna Kandasamy and Ilias Vlachos

Benchmarking: An International Journal, Emerald

Biodegradable Retanning Material From Tannery Triming Waste: Extraction, Preparation and Application

Md. Farhad Ali, Papia Hauque, Md. Abdulla-Al-Mamun, Tamanna Jaman

Leather and Footwear Journal, vol. 23, no. 4, Revista

An analysis of the correlation between income and the consumption of energy in Bangladesh

Md. Abdus Shabur and Dr. Md. Farhad Ali

Energy Informatics, vol. 7, no. 1, Springer, pp. 17

An analysis of the correlation between income and the consumption of energy in Bangladesh

Md. Abdus Shabur and Md. Farhad Ali

Energy Informatics, springer, pp. 1-18

Biodegradable Retanning Material From Tannery Triming Waste: Extraction, Preparation and Application

Md. Farhad Ali, Papia Hauque, Md. Abdulla-Al-Mamun and Tamanna Jaman

Leather and Footwear Journal, vol. 23, no. 4, Revista, pp. 282-302

Removal of Cr(VI) from wastewater by impregnated activated carbon generated from vegetable tanned leather waste with aluminium oxide.

I. J. Bithi, M. A. Mottalib, Hijmun-Nahar, M. S. Miran, M. F. Ehsan and M. M. Rahman

Results in Surfaces and Interfaces, vol. 14, Elsevier, pp. 100197

Synthesis and application of carboxymethyl cellulose-graphene oxide composite for the mitigation of Pb2+ and Cd2+ from aqueous solution

Md Saidur Rahman Shakil, Mst Sharmin Aktar, Md Arafat Hossain and Sobur Ahmed

Cleaner Engineering and Technology, vol. 18, Elsevier, pp. 100724

Development of low-cost natural adsorbent for the abatement of pollution from tannery effluent – A green technology

Sabina Akter, Umme Habiba Bodrun Naher, Razia Sultana

Cleaner Water, Elsevier, vol. 1, pp. 100005

Recent developments in environment-friendly methods for valuing leather waste as a means of promoting the circular economy: a comprehensive review.

Md. Abdus Shabur and Md. Amjad Hossain

Leather & Footwear Journal/Revista de Pielarie Incaltaminte, vol. 24, no. 1, Institutional National de Cercetare-Dezvoltare Pentru Texttile Pielarie, Romania, pp. 51-72

A green strategy for collagen extraction from tannery raw trimmings using papain enzyme: Process optimization by MW-TOPSIS for enhanced yield

Mysha Maliha, Taslim Ur Rashid and Mohammed Mizanur Rahman

International Journal of Biological Macromolecules, vol. 262, Part 2, Elsevier, pp. 130040

Investigating social media's impact on the new era of interactive learning: A case study of Bangladesh

Md. Abdus Shabur and Md. Raihan Siddiki

Heliyon, Elsevier

Optimization of enhanced collagen extraction from tannery rawhide trimming waste using pineapple peel-derived bromelain enzyme through response surface methodology

Sajneen Akter Munmun, Taslim Ur Rashid and Mohammed Mizanur Rahman

Journal of Cleaner Production, vol. 438, Elsiver, pp. 140774

Characterization of Enzyme-Treated Eco-friendly Iron Tanned Leather

Md. Abu SAYID MIA, Nadia Sultana MILY, Md. Arafat Al MAMUN, Md. Farhad ALI and Uttam Kumar ROY

Leather and Footwear Journal 24 (2024) 1, INCDTP-ICPI, pp. 10 (73-82)

Synthesis and application of carboxymethyl cellulose-graphene oxide composite for the mitigation of Pb2+ and Cd2+ from aqueous solution

Md. Saidur Rahman Shakil and Mst. Sharmin Aktar, Md. Arafat Hossain, Sobur Ahmed

Cleaner Engineering and Technology, vol. 18, Elsevier, pp. 00724

Synthesis and application of carboxymethyl cellulose-graphene oxidecomposite for the mitigation of Pb2+ and Cd2+ from aqueous solution

Md. Saidur Rahman Shakil, Mst. Sharmin Aktar, Md. Arafat Hossain and Sobur Ahmed*

Cleaner Engineering and Technology, vol. 18, Elsevier

CHARACTERIZATION OF ENZYME-TREATED ECO-FRIENDLY IRON TANNED LEATHER

Md. Farhad ALI and Md. Abu SAYID MIA1 , Nadia Sultana MILY , Md. Arafat Al MAMUN

Leather and Footwear Journal, vol. 24, no. 1, Revista

Use of smartphones for social networking-men vs women: case study of Bangladesh

Md. Abdus Shabur and Jafrin Jahan

Discover Global Society, vol. 2, no. 1, Springer, pp. 3

Synthesis and application of carboxymethyl cellulose-graphene oxide composite for the mitigation of Pb2+ and Cd2+ from aqueous solution

Md. Saidur Rahman Shakil, Mst. Sharmin Aktar, Md. Arafat Hossain, Sobur Ahmed

Cleaner Engineering and Technology, Elsevier

Sustainable leather tanning: Enhanced properties and pollution reduction through crude protease enzyme treatment

Alam, Md. Samaul; Hasan, Md. Jawad; Haque, Papia; Rahman and Mohammed Mizanur

International Journal of Biological Macromolecules, vol. 268, Elsevier, pp. 131858

Arsenic

Amal Kanti Deb

In Inorganic Contaminants and Radionuclides, ELsevier

Toxic effects of the endocrine disrupter on plants

Meem Muhtasim Mahdi, Md. Didarul Islam and Md. Arafat Hossain

In Current Developments in Biotechnology and Bioengineering, ElSEVIER, pp. 139-152

Treatment of tannery wastewater by different membrane bioreactors: A critical review

Md Abdul Moktadir, Mysha Maliha, Sajneen A. Munmun, Md. Samaul Alam, Ariful Islam and Mohammed Mizanur Rahman

Environmental Advances, vol. 15, Elsevier, pp. 100478

Treatment of tannery wastewater by different membrane bioreactors: A critical review

Md Abdul Moktadir, Mysha Maliha, Sajneen A. Munmun, Md Samaul Alam, Md Ariful Islam and Mohammed Mizanur Rahman

Environmental Advances, vol. 15, Elsevier, pp. 100478

Synthesis and Characterization of TiO2-ZnO Nanocomposite Photocatalyst for the Removal of Basic Violet 14 as an Industrial Dye

Md. Abdullah Bin Samad, Emran Quayum, Md. Amjad Hossain, Tajmeri S A Islam and Mohammad Mahmudur Rahman Khan

Bulletin of Chemical Reaction Engineering & Catalysis, vol. 18, no. 4, Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS), pp. 688-699

Evaluating the difficulties and potential responses to implement Industry 4.0 in Bangladesh’s steel sector

Md. Abdus Shabur, Dr. Kazi Afzalur Rahman and Md. Raihan Siddiki

Journal of Engineering and Applied Science, vol. 70, no. 1, Springer, pp. 158

Treatment of tannery wastewater by different membrane bioreactors: A critical review

Md Abdul Moktadir, Mysha Maliha, Sajneen A. Munmun, Md. Samaul Alam, Ariful Islam and Mohammed Mizanur Rahman

Environmental Advances, vol. 15, Elsevier, pp. 100478

Preparation and characterization of composite sheets from solid leather waste with plant fbers: a waste utilization effort

M. A. Mottalib, M. Tauhiduzzaman, M. J. Rahman and M. A. Kalam

Clean Technologies and Environmental Policy, vol. 26, Springer, pp. 1025–1038

Recovery and Reuse of Chromium from Tannery Waste Chrome-liquor using Solar Evaporation Process.

M. A. Mottalib, M. Abdulla-Al-Mamun, M. Marma and M. F. Ali

Textile & Leather Review, vol. 6, idd3, Croatia, pp. 652-666

Recovery and Reuse of Chromium from Tannery Waste Chrome-liquor using Solar Evaporation Process

Md. Abdulla-Al-Mamun, Mongsathowai Marma, Md. Farhad Ali and Md. Abdul Mottalib

Textile & Leather Review, vol. 6, idd3, pp. 652-666

Investigation of key performance indicators for performance management of the manufacturing industry in the era of the COVID-19 pandemic

Sajneen Akter Munmun, Md. Abdul Moktadir, Sunil Tiwari, Mohammad Zoynul Abedin and Charbel Jose Chiappetta Jabbour

Annals of Operations Research, Springer

Environmental Sustainability: A Challenge for Leather Industry

Kanij Fatema, Md. Rayhan Sarker, Kawsar Akhtar, Aklima Begum and Shafiqul Islam

Leather and Footwear Journal, vol. 23, no. 3, CERTEX Publishing House, Bucharest,, pp. 209-226

Recovery and Reuse of Chromium from Tannery Waste Chrome-liquor using Solar Evaporation Process.

Md.Abdulla-Al-Mamun,Mongsathowai Marma, Md. Farhad Ali, Md. Abdul Mottalib

vol. 6, idd3, pp. 652-666

Recovery and Reuse of Chromium from Tan Yard Solid Waste in Leather Manufacturing

M. A. Mottalib, M. Chandra, U. H. B. Naher and M. A. Goni

Textile & Leather Review, vol. 6, pp. 622-651

Potentials of bio-adsorbent prepared from coconut fibre in mitigation of pollution from tanning effluent

Mst Sharmin Aktar, Md. Saidur Rahman Shakil and Fatema Tuj-Zohra

Cleaner Engineering and Technology, vol. 17, Elsevier, pp. 100687

Optimal site selection for solar plant using analytical hierarchy process (AHP): A case study in Bangladesh

Mst. Anjuman Ara, Fatima-Tuz- Zohora, Nabila Nurul, Anzum Tanvir and Naseem Ahmed

Environmental Progress & Sustainable Energy, vol. 43, no. 2, John Wiley and Sons Inc.

Biomass-based curing agents for sustainable leather processing

Md. Abu Jafor Siddiki, Md. Jawad Hasan, Uttam Kumar Roy, Md. Aftab Ali Shaikh and Md. Mokarom Hossain

ChemRxiv, vol. 1, Cambridge University Press, pp. 1-16

Experimental Study on the Removal of Chromium (III) Ions Using Synthesized Reduced Graphene Oxide (RGO)

Forhad Ahammed Bin Azam, Amal Kanti Deb, Md. Delwar Hossain and Manjushree Chowdhury

Textile and Leather Review, vol. 6, iddr3, Croatia, pp. 543-558

Recovery and Reuse of Chromium from Tan Yard Solid Waste in Leather Manufacturing.

Mottalib MA, Chandra M, Naher UHB, Goni MA

Textile & Leather Review, vol. 6, pp. 622-651

Potentials of bio-adsorbent prepared from coconut fibre in mitigation of pollution from tanning effluent

Mst. Sharmin Aktar and Md Saidur Rahman Shakil, Fatema Tuj-Zohra

Cleaner Engineering and Technology, Elsevier

Process optimization of anionic dye (Melioderm HF Brown G) removal from aqueous solution utilizing adsorbent prepared from Labeo rohita fishbone

Md. Arafat Hossain,, Plabon Islam Turzo,, Md. Saidur Rahman Shakil and Fatema Tuj-Zohra

Water Practice & Technology, vol. 18, IWA, pp. 2277–2295

Environmental Sustainability: A Challenge for Leather Industry

Kanij FATEMA, Md Rayhan SARKER, Kawsar AKHTAR, Aklima BEGUM and Shafiqul ISLAM

Leather and Footwear Journal, vol. 2023, no. 3, Revista, pp. 209-226

Occupational Exposure of Footwear Roughing Dust during Footwear Manufacturing Process

Md. Mehedi Hasan, Hossain ISLAM, Md. Mukter Alam, Mongsathowai Marma and Md. Rayhan Sarker

Leather and Footwear Journal, vol. 23, no. 3, Revista

Process optimization of anionic dye (Melioderm HF Brown G) removal from aqueous solution utilizing adsorbent prepared from Labeo rohita fishbone

Md. Arafat Hossain, Plabon Islam Turzo, Md. Saidur Rahman Shakil and Fatema-Tuj-Zohra

Water Practice and Technology, vol. 18 (10): 2277–2295, IWA Publishing

A novel vegetable tannin for eco-leather production: separation, characterization and application of facile valorized indigenous Acacia nilotica bark extract

Fatema-Tuj-Zohra, Md. Saidur Rahman Shakil, Mst. Sharmin Aktar, Shohanur Rahman and Sobur Ahmed

Bioresource Technology Reports, vol. 23, Elsevier, pp. 101591

Ultrasonication-aided dye extraction from waste onion peel and eco-friendly dyeing on organic cotton fabric with enhanced efficacy in color fixation

Shibly MA, Al Tahsin A and Chisty MA

Chemical Papers, vol. 77, Springer, pp. 4345-53

A novel vegetable tannin for eco-leather production: separation, characterization and application of facile valorized indigenous Acacia nilotica bark extract

Fatema-Tuj-Zohra, Md. Saidur Rahman Shakil, Mst. Sharmin Aktar, Shohanur Rahman and Sobur Ahmed

Bioresource Technology Reports, vol. 23, Elsevier, pp. 101591

A Novel Vegetable Tannin for Eco-Leather Production: Separation, Characterization and Application of Facile Valorized Indigenous Acacia nilotica Bark Extract

Fatema-Tuj-Zohra, Md. Saidur Rahman Shakil, Mst. Sharmin Aktar, Md. Shohanur Rahman and Sobur Ahmed*

Bioresource Technology Reports, vol. 23, no. 2, Elsevier Ltd, pp. 101591

Facile extraction and prospective application of indigenous Cassia fistula tannin in sustainable leather manufacture

Rafia Tasnim Oaishi, Sobur Ahmed, Fatema- Tuj-Zohra*, Asma Rahman and Nahyan Mohammad Abid

Journal of Dispersion Science and Technology, Taylor & Francis

A Novel Vegetable Tannin for Eco-Leather Production: Separation, Characterization and Application of Facile Valorized Indigenous Acacia nilotica Bark Extract

Fatema-Tuj-Zohra, Md. Saidur Rahman Shakil, Mst. Sharmin Aktar, Md. Shohanur Rahman and Sobur Ahmed*

Bioresource Technology Reports, vol. 23, no. 2, Elsevier Ltd., pp. 101591

Facile extraction and prospective application of indigenous Cassia fistula tannin in sustainable leather manufacture,

Rafia Tasnim Oaishi, Sobur Ahmed, Fatema- Tuj-Zohra*, Asma Rahman and Nahyan Mohammad Abid

Journal of Dispersion Science and Technology, Taylor and Francis

OCCUPATIONAL EXPOSURE OF FOOTWEAR ROUGHING DUST DURING FOOTWEAR MANUFACTURING PROCESS

Md. Mehedi HASAN, Hossain ISLAM, Md. Mukter ALAM, Mongsathowai MARMA, Md. Rayhan SARKER

Leather and Footwear Journal, vol. 23, no. 3, NCDTP-ICPI, Bucharest, RO, pp. 191-198

A novel vegetable tannin for eco-leather production: separation, characterization and application of facile valorized indigenous Acacia nilotica bark extract

Fatema-Tuj-Zohra, Md. Saidur Rahman Shakil, Mst. Sharmin Aktar, Shohanur Rahman, Sobur Ahmed.

Bioresource Technology Reports, Publisher:, Elsevier

Modeling supply chain resilience drivers in the context of COVID-19 in manufacturing industries: leveraging the advantages of approximate fuzzy DEMATEL

Md. Rayhan Sarker, Md. Sazid Rahman, Syed Mithun Ali, Niamat Ullah Ibne Hossain and Ernesto D. R. Santibanez Gonzalez

Journal of Intelligent Manufacturing, Springer

Potential Removal of Chromium from Tannery Wastewater by Water Hyacinth Roots. Water Conservation Science and Engineering

M. A. Mottalib, N. Jannat, , ,, M. A. Mottalib, A. Goni, M. Khan,· M. S. Miran., M. A. Tanmoy, H. Nahar and N. Khan

Water Conservation Science and Engineering., vol. 8, Springer, pp. 34

Removal of chromium (III) ion from tannery wastewater and river water using natural and activated orange peel

Jawad IA, Chisty AH and Rahman MM

Desalination and Water Treatment, vol. 299, Desalination, pp. 118-127

An eco-friendly approach of biodiesel production from tannery fleshing wastes by crude neutral protease enzyme

Fatema Tujjohra, Md Samaul Alam, Md Matiar Rahman and Mohammed Mizanur Rahman

Cleaner Engineering and Technology, vol. 14, Elsevier, pp. 100638

Modification of Footwear PVC Outsoles into Graphene Oxide-Based PVC (PVC/GO) Soling Composites for the Enhancement of Better Physical Properties

Md. Delwar Hossain, Amal Kanti Deb, Mokarom Hossain, Forhad Ahammed Bin Azam and Md Manjushree Chowdhury

Textile and Leather Review, vol. 6, iddr3, Croatia, pp. 271-283

Preservation of goat skin using fish scale powder: An initiative to reduce pollution in tannery wastewater

Plabon Islam Turzo, Tusher Sarder, Fatema-Tuj-Zohra, Mahabubur Rahman Khan and Mahmuda Hakim

Case Studies in Chemical and Environmental Engineering, vol. 8, no. 4, Elsevier, pp. 100413

Preservation of goat skin using fish scale powder: An initiative to reduce pollution in tannery wastewater

Plabon Islam Turzo, Tusher Sarder, Fatema-Tuj Zohra, Mahabubur Rahman Khan, Mahmuda Hakim

Case Studies in Chemical and Environmental Engineering, vol. 8, ELSEVIER

Investigation of herbicide sorption-desorption using pristine and organoclays to explore the potential carriers for controlled release formulation

Amal Kanti Deb

Modification of Footwear PVC Outsoles into Graphene Oxide-Based PVC (PVC/GO) Soling Composites for the Enhancement of Better Physical Properties

Amal Kanti Deb

A novel bio-adsorbent development from tannery solid waste derived biodegradable keratin for the removal of hazardous chromium: A cleaner and circular economy approach

Md. Aowlad Hossain, Razia Sultana, Md. Abdul Moktadir and Md. Amjad Hossain

Journal of Cleaner Production, vol. 413, ELSEVIER, pp. 137471

Monitoring the curing efficiency of a plant-based green engineered additive on caprine skin: a spectroscopic and chemometric novel approach

Md. Mokarom Hossain and Uttam Kumar Roy

Heliyon, Elsevier, pp. 1-11

Nadim Munna, Rahim Abdur, Robiul Islam, Muhammad Shahriar Bashar, Syed Farid Uddin Farhad, Md. Kamruzzaman, Shahin Aziz, Md. Aftab Ali Shaikh, Mosharof Hossain and Mohammad Shah Jamal. Influence of Sn doping on the optoelectronic properties of ZnO nanoparticles. Nanoscale Advances. 5, 2023, 4996-5004

Md. Kamruzzaman

Circular economy practices in the leather products industry toward waste valorization: an approach of sustainable environmental management

Mysha Maliha, Md Abdul Moktadir, Surajit Bag and Alexandros I Stefanakis

Benchmarking: An International Journal, Emerald Publishing Limited

Reduction of water consumption in leather processing and an investigation of the leather quality

M. A. Mottalib, S. Ferdous, M. A. Goni, M. A. Mamun and A. A. Sheikh

Textile & Leather Review, vol. 6, pp. 132-150

An eco-friendly approach of biodiesel production from tannery fleshing wastes by crude neutral protease enzyme

Fatema Tujjohra, Md. Samaul Alam, Md. Matiar Rahman and Mohammed Mizanur Rahman

Cleaner Engineering and Technology, vol. 14, Elsevier Ltd, pp. 100638

Thermally crosslinked electrospun nanofibrous mat from chrome-tanned solid wastes for cationic dye adsorption in wastewater treatment

Abrar A Sitab, Fatema Tujjohra, Taslim Ur Rashid and Mohammed Mizanur Rahman

Cleaner Engineering and Technology, vol. 13, Elsevier, pp. 100621

Reduction of Water Consumption in Leather Processing and an Investigation of the Leather Quality

Sumaya Ferdous, Md. Abdul Mottalib, Md. Abdul Goni, Md. Abdulla-Al-Mamun and Md. Aftab Ali Sheikh

Textile & Leather Review, vol. 6, pp. 132-150

Influences of short-chain alcohols, urea and temperature on aggregation behaviour of tetradecyltrimethylammonium bromide and antidiabetic drug mixture

M. A. Mottalib, R. Akter, K. M. Anis-Ul-Haque, D. Kumar, M. T. R. Joy, S. Rana, M. A. Hoque, T. M. Almutairi, A. A. A. Mohammed and A. Iqbal

Molecular Physics, vol. 121, no. 1, Taylor and Francis

Ecofriendly pretreatment of cotton fabrics by ultrasonication and reusing bath chemicals

Mohammad MU Hoque, Sunzida H Rimu, Abul K Mallik, Mohammed Mizanur Rahman

Environmental Science and Pollution Research, vol. 30, no. 13, Springer Berlin Heidelberg, pp. 36904-36914

Novel Vegetable Tanning Techniques by Notholithocarpus densiflorus Extract and Fatliquoring with Indigenous Bovine Fat

Md. Abdulla-Al-Mamun, Bashudev Sarker, Dipa Islam and Asma Rahman

Textile & Leather Review, vol. 6, idd3, pp. 78-97

Conversion of Leather Industry Solid Waste to Organic Fertilizer by Vermicomposting: Use for Plant Growth

Md. Abdulla-Al-Mamun, Nazmul Hossain, Mohammad Iqbal Hossain and Rabeya Sultana

Textile & Leather Review, vol. 6, idd3, Croatia, pp. 37-56

Adsorption of Cu(II) and Cd(II) with graphene based adsorbent: adsorption kinetics, isotherm and thermodynamic studies

Sobur Ahmed, Fatema-Tuj-Zohra, Tasrina R. Choudhury, Md. Zahangir Alam and Mohammad Nurnabi*

Desalination and Water Treatment, vol. 285, Desalination Publications, pp. 167–179

Understanding Iron Impurities in Australian Kaolin and Their Effect on Acid and Heat Activation Processes of Clay

Amal Kanti Deb

Adsorption of Cu(II) and Cd(II) with graphene based adsorbent: adsorption kinetics, isotherm and thermodynamic studies,

Sobur Ahmed, Fatema-Tuj-Zohra, Tasrina R. Choudhury, Md. Zahangir Alam, Mohammad Nurnabi*

Desalination and Water Treatment, vol. 285, pp. 167-179

Stimuli-Responsive Photonic Hydrogel

Md Anamul Haque, Md Aftab Ali Shaikh and Kawsar Akhtar

In Encyclopedia of Materials: Plastics and Polymers, Elsevier, pp. 1075-1091

Poly (lactic acid)(PLA)‐Based Nanosystems in Biomedical Applications.

Mallik AK, Chisty AH, Nuruzzaman Khan M, Shahruzzaman M, Haque P and Mizanur Rahman M

In Nanoengineering of Biomaterials, Wiley, pp. 63-89

Insight of Iron Oxide-Chitosan Nanocomposites for Drug Delivery

Chisty AH and Rahman MM

In Nanoscale Engineering of Biomaterials: Properties and Applications, Springer Link, pp. 619-648

Antibacterial Surface Modification to Prevent Biofilm Formation on Polymeric Biomaterials

Mallik AK, Chisty AH, Khan MN, Kabir SF and Shahruzzaman M, Rahman MM

In Nanoscale Engineering of Biomaterials: Properties and Applications, Springer Link, pp. 425-455

Lignin-metal oxide composite for photocatalysis and photovoltaics

Yeasmin F, Masud RA, Chisty AH and Hossain MA, Mallik AK, Rahman MM

In Renewable Polymers and Polymer-Metal Oxide Composites, pp. 447-476

Preparation of poly (acrylic acid) exfoliated clay composite by in-situ polymerisation for decolouration of methylene blue from wastewater

Rahman MM, Rimu SH, Biswas S, Rashid TU, Chisty AH, Rahman A, Murad S and Haque P

International Journal of Environmental Analytical Chemistry, vol. 102, no. 18, Taylor and Francis, pp. 6538-6554

Insight of chitosan-based nanocomposite for removal of hexavalent chromium from wastewater-a review

Sunzida H Rimu, Mohammed Mizanur Rahman

International Journal of Environmental Analytical Chemistry, vol. 102, no. 18, Taylor & Francis, pp. 6801-6818

Recent development in cellulose nanocrystal-based hydrogel for decolouration of methylene blue from aqueous solution: a review

Mohammed Mizanur Rahman, Sunzida H Rimu

International Journal of Environmental Analytical Chemistry, vol. 102, no. 18, Taylor & Francis, pp. 6766-6783

An Evaluation of Simulated Batik echniques to Chrome Re-tanned Leather Substrates.

Naher UHB, Chowdhury MMR, Rakib NK

vol. 5, pp. 612-625

Production of biofuel by co-pyrolysis of leather dust with plastic waste: characterization and comparison among different feed compositions

M. M. H. Biswas, M. A. Mottalib, M. Nurnabi and M. S. Islam

J. Bang. Chem. Soc., vol. 34, no. 1, Bangladesh Chemical Society, pp. 109-118

Optimisation model for simultaneous delivery and pickup vehicle routing problem with time windows

Mst. Anjuman Ara, Md. Tanvir Ahmed and Nilufa Yeasmin

Int. J. Services and Operations Management, vol. 43, no. 2, Inderscience Enterprises Ltd.

Effects of inorganic materials on the waste chicken feather fiber reinforced unsaturated polyester resin-based composite: An approach to environmental sustainability

Md. Farhad Ali, A.M.Sarwaruddin Chowdhury et al

Composites Part C: Open Access, vol. 9, Elsevier

Polygonum hydropiper in goatskin preservation: A sustainable leather processing approach

Md. Mokarom Hossain, Sobur Ahmed, Sharmin Zaman Emon, Latiful Bari, Uttam Roy

Sustainable Chemistry and Pharmacy, vol. 29, Elsevier, pp. 29:100770

Hybrid Treatment of Tannery Effluent Natural Coagulants for Vegetative Seed Germination

Md. Abdulla-Al-Mamun and Quazi Farjana Lamia

Journal of Engineering Science, vol. 13, no. 1, pp. 73-79

Energy Harvesting from Close Type Footwear: A Smart Design Approach

Md. Alamgir Hossain, Md. Abdulla-Al-Mamun and Adhir Chandra Paul

Textile & Leather Review, vol. 5, pp. 253-267

Leather processing industry waste (lime fleshing): A prospective substrate for production of biodiesel

S. K. Banik1 *, T. E. Nafis2, U. K. Roy2 and M. S. Islam1

Bangladesh Journal of Scientific and Industrial Research, vol. 57(3), 2022, BCSIR, pp. 131-138

Application of Indigenous Plant-Based Vegetable Tanning Agent Extracted from Xylocarpus granatum in Semi-Chrome and Chrome Retanned Leather Production

Raju Kumar Das, Al Mizan, Fatema Tuj Zohra,Bahri Basaran, Sobur Ahmed*

Tekstil ve Konfeksiyon, vol. 32, no. 3

Polygonum hydropiper in goatskin preservation: A sustainable leather processing approach

Md. Mokarom Hossain *, Sobur Ahmed, Sharmin Zaman, Md. Latiful Bari and Uttam Kumar Roy

Sustainable Chemistry and Pharmacy, vol. 29 (2022), no. 100770, ELSEVIER

Extraction of a novel tanning agent from indigenous plant bark and its application in leather processing

Raju Kumar Das, Al Mizan, Fatema Tuj Zohra, Sobur Ahmed*, Khondoker Shahin Ahmed and Hemayet Hossain

Journal of Leather Science and Engineering, vol. 4, no. 18, Springer open

Role of beryllium in the environment: Insights from specific sorption and precipitation studies under different conditions

Amal Kanti Deb

Arsenic Contamination in Soil, Vegetable, Groundwater, and Riverine Fish Species in Joypurhat, Bangladesh

Md. Sakhawat Hossain, S.M. Abidur Rahman, Md. Mizanur Rahaman, Md. Ali Muztaba and Uttam Kumar Roy

INDONESIAN JOURNAL OF SOCIAL AND ENVIRONMENTAL ISSUES (IJSEI), vol. Voloume-3, no. Issue-1, IJSEI, pp. 29-36

Magnetite Nanoparticles Loaded into Halloysite Nanotubes for Arsenic(V) Removal from Water

Amal Kanti Deb

ACS Applied Nano Materials

Health Risk Index Assessment for Heavy Metal Accumulation in Leafy Vegetables grown on Tannery Effluent Contaminated Soil

Sobur Ahmed*, Fatema-Tuj-Zohra, Meem Muhtasim Mahdi, Md. Nurnabi, Md. Zahangir Alam, Tasrina Rabia Choudhury

Toxicology Reports, vol. 9, Elsevier, pp. 346–355

Removal of Cr(III) from tanning effluent using adsorbent prepared from peanut shell, Desalination and Water Treatment

Fatema-Tuj-Zohra, Sobur Ahmed, Razia Sultana , Md. Nurnabi,*, Md. Zahangir Alam*

Desalination and Water Treatment, vol. 266, pp. 91–100

Protease enzyme based cleaner leather processing: A review

Md Jawad Hasan; Papia Haque; Mohammed Mizanur Rahman

Journal of Cleaner Production, vol. 365, Elsevier, pp. 132826

A two-phase approach to efficiently support product recovery systems in a circular economy context

Dwivedi, A., Madaan, J., Santibanez Gonzalez, E. D. R. and Moktadir, M.A.,

Management Decision, Emerald, UK, Emerald

Integrating the circular economy and industry 4.0 for sustainable development: Implications for responsible footwear production in a big data-driven world.

Ashish Dwivedi, A.,, Moktadir, M.A., and Jabbour, C.J.C., Carvalho, D.E.,

Technological Forecasting and Social Change, Elsevier

Progress in Surface-modified Silicas for Cr(VI) Adsorption: A Review

Mallik, A.K.,, Moktadir, M.A., and Rahman, M.A., Shahruzzaman, M., Rahman, M.M.,

Journal of Hazardous Materials, Elsevier, vol. 423, no. 127041, Elsevier

Impact of COVID-19 on Small- and Medium-sized Enterprises

Md. Rayhan Sarker, Rahman SMA and Islam AKMH

Global Business Review, vol. April, SAGE

A Simple Approach to Potential Application of Vegetable Tanning Techniques by the Indigenous Bovine Fat and Notholithocarpus densiflorus Extract

Md. Abdulla-Al-Mamun and Bashudev Sarkar

7th International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE 2022), Khulna: SciEn

Halloysite Templated Copper Nanoclusters: A Multifunctional Biocompatible Nanohybrid

Amal Kanti Deb

). Fabrication and Characterization of Composite Materials Using Multiple Waste Materials (Leather & amp; Jute Fabrics) and Unsaturated Polyester Resin

Md. Farhad Ali, A.M.Sarwaruddin Chowdhury et al

Nano Hybrids and Composites, vol. 33, Nano Hybrids and Composites ,, pp. 1-11

Utilization of waste chicken feather for the preparation of eco-friendly and sustainable composite.

Md. Farhad Ali, A.M.Sarwaruddin Chowdhury et al

Cleaner Engineering and Technology, vol. 4, Elsevier

Magnetically separable mesoporous alginate polymer beads assist adequate removal of aqueous methylene blue over broad solution pH

Amal Kanti Deb

Mechanistic insights of hexavalent chromium remediation by halloysite-supported copper nanoclusters

Amal Kanti Deb

Trace Metal Contamination of Vegetables Grown near the Tannery Estate in Savar, Bangladesh: Human Health Risk Assessment

Umme Habiba Bodrun Naher, Md. Jawad Hasan, Md. Morshedul Hasan, Md. Farhad Ali

Textile and Leather Review, vol. 4, pp. 297-314

Development of Adsorbent from Sugarcane Bagasse for the Removal of Pollutants from Chrome Tanning Effluents

Razia Sultana, Sobur Ahmed, Fatema -Tuj-Zohra*

Textile and Leather reviews, vol. 4, no. 2

Eco-Friendly Treatment of Green Banana Fiber in Compared to Chemical Treatment

Muhammad Abdullah Al Mamun, Md. Mehedul Hasan, Md. Farhad Ali and G. M. Shafiur Rahman

Journal of Materials and Environmental Science, vol. 12, no. 6, University of Mohammed Premier, pp. 823-826

The investigation of challenges of implementing Industry 4.0 in Bangladesh

Md. Abdus Shabur, Monowar Wadud Hridoy and Kazi Afzalur Rahman

Academia Letters, vol. 2, Academia Letters

Fabrication and characterization of eco-friendly composite materials from natural animal fibers.

Md. Farhad Ali, A. M. Sarwaruddin Chowdhury et al.

Heliyon, vol. 7, no. 5, Cell Press

Physico-Mechanical Properties of Treated Chicken Feather–Reinforced Unsaturated Polyester Resin Based Composites.

Md. Farhad Ali, A.M.Sarwaruddin Chowdhury et al

Nano Hybrids and Composite, vol. 32, Scientific.Net, pp. 73-84

Simultaneous determination of heavy metals and cationic dyes from industrial effluent by prawn shell derived chitosan-g-poly (acrylic acid) biocomposite

Rahman MM, Lata NN, Rimu SH and Chisty AH

Desalination and Water Treatment, vol. 216, Desalination

A Comparative Study on Physical Properties of Bag and Lining Leather from Two Different Origins

Md. Farhad ALI ,Mahbub KAMAL

Journal of Environmental Science, Toxicology and Food Technology, vol. 15, no. 3, International Organization Of Scientific Research (IOSR), pp. 33-38

Trace Metal Contamination of Vegetables Grown Near the Tannery Estate in Savar, Bangladesh: Human Health Risk Assessment

Umme Habiba Bodrun Naher, Md. Jawad Hasan , Md. Morshedul Hasan, Md. Farhad Ali

Textile and Leather Review, vol. 4, idd3

Synthesis and characterization of graphene oxide for removal of Cr(III) from tannery effluent

Sobur Ahmed, Fatema-Tuj-Zohra, Muhtasim M. Mahdi, Dewan Md. Mahmudunnabi, Tasrina R. Choudhury, Md. Zahangir Alam, Mohammad Nurnabi

Desalination and Water Treatment, vol. 244, www.deswater.com, pp. 201–211

Synthesis of Environmentally Benign Ultra-Small Copper Nanoclusters-Halloysite Composites and Their Catalytic Performance on Contrasting Azo Dyes

Amal Kanti Deb

Heavy metals accumulation in different cultivated fish tissues through commercial fish feeds and health risk estimation in consumers in Bangladesh

B. Saha, M. A. Mottalib and A. N. M Al- Razee

Chem Rev Lett., vol. 4, Eurasian Science Society (ESS), pp. 10-20

Remarkable enhancement of thermal stability of epoxy resin through the incorporation of mesoporous silica micro-filler

Yeasmin F, Mallik AK, Chisty AH, Robel FN, Shahruzzaman M, Haque P, Rahman MM, Hano N, Takafuji M and Ihara H

Heliyon, vol. 7, Cell Press

KEY PERFORMANCE INDICATORS FOR ADOPTING SUSTAINABILITY PRACTICES IN FOOTWEAR SUPPLY CHAINS

Md. Abdul Moktadir, Yead Mahmud, Audrius Banaitis, Tusher Sarder, Mahabubur Rahman Khan

E+M economics and management, vol. 24, no. 1, E+M economics and management, pp. 197–213

Dyeing of shoe upper leather with extracted dye from Acacia nilotica plant bark- An eco-friendly initiative,

Meem Muhtasim Mahdi, Fatema -Tuj-Zohra, Sobur Ahmed

Progress in Color, Colourants and Coatings, vol. 14, pp. 241-258

A cleaner goatskin preservation with leaf paste and powder: An approach for salinity remediation in tannery wastewater

Uddin, Md. Minhaz; Hasan, Md. Jawad; Mahmud, Yead; Uddin, Nizam; Rahman, Khandaker Tanzim; Nishad, Imam Jafar Ali; Shamsuddin and Sayed Md.

Cleaner Engineering and Technology, vol. 6, Elsevier, pp. 100357

Heavy metal pollution in the soil-vegetable system of Tannery Estate

Hossain, Md. Mokarom; Chowdhury, Md. Arif; Hasan, Md. Jawad; Rashid, Md. Harun-Ar; Acter, Thamina; Khan, M. Nuruzzaman; Mahatabuddin, Sheikh; Uddin and Nizam

Environmental Nanotechnology, Monitoring & Management, vol. 16, Elsevier, pp. 100557

Comparative seasonal assessment of pollution and health risks associated with heavy metals in water, sediment and Fish of Buriganga and Turag River in Dhaka City, Bangladesh

Hossain, M. N.; Rahaman, Ashiqur; Hasan, Md. Jawad; Uddin, Md. Minhaz; Khatun, Nazma; Shamsuddin and Sayed Md.

SN Applied Sciences, vol. 3, no. 4, Springer, pp. 509

Trace Metal Contamination of Vegetables Grown Near the Tannery Estate in Savar, Bangladesh: Human Health Risk Assessment

Naher, Umme Habiba Bodrun; Hasan, Md Jawad; Hasan, Md Morshedul; Ali and Md Farhad

Textile & Leather Review, vol. 4, idd3, pp. 297-314

Development of Adsorbent from Sugarcane Bagasse for the Removal of Pollutants from Chrome Tanning Effluents

Sultana, R., Ahmed, S., and Zohra, F.T.,

Textile & Leather Review

A supply chain disruption risk mitigation model to manage COVID-19 pandemic risk

Shahed, K.S., Azeem, A., Ali, S.M., and Moktadir, M.A.,

Environmental Science and Pollution Research, Springer Nature

Assessing sustainability risks in the supply chain of the textile industry under uncertainty

Shahriar Raian, Syed Mithun Ali, Md. Rayhan Sarker, Bathrinath Sankaranarayanan, Golam Kabir, Sanjoy Kumar Paul and Ripon Kumar Chakrabortty

Resources, Conservation and Recycling, vol. 177, no. 2022, Elsevier

A recovery planning model for online business operations under the COVID-19 outbreak

SK Paul,, MA Moktadir, and K Sallam, TM Choi, RK Chakrabortty

International Journal of Production Research, Taylor & Francis, pp. 1-23

Photo-Degradation of Orange G as an Environmental Pollutant with TiO2-ZnO Composite Material

Md Abdullah Bin Samad, Md. Amjad Hossain, Tajmeri S. A. Islam and Waziha Farha

Fine Chemical Engineering, vol. 3, Universal Wiser Publisher, pp. 29-38

Assessment of Heavy Metal Contamination in Sediments of the Shitalakhya River, Bangladesh

A N M Al-Razee, M. N. Abser, M. A. Mottalib, A. Nargis, A. K. Jhumur, M. M. U. Thakur, W. Liu, S. Poddar, M. S. I. Sarker and A. Habib

Pak. J. Anal. Environ. Chem., vol. 22, no. 1, pp. 84-99

HEALTH RISK ASSESSMENT OF BLACK CARBON EMISSION FROM FOSSIL FUEL

Md. Dulal Hossain Khan, Mahima Sultana Sarkar, Syeda Sadika Haque and Md. Amjad Hossain

Journal of Engineering Science, vol. 12, no. 2, pp. 23-28

LEATHER WASTE INTO VALUE ADDED LEATHER PRODUCTS: A WASTE TO WEALTH APPROACH

Md. Amjad Hossain and Syed All Zami

Journal of Life and Earth Sciences, vol. 6, no. 1, pp. 73-82

HEAVY METAL CONCENTRATIONS AND HUMAN HEALTH RISK ASSESSMENT OF THREE WILD AND CULTURED FISH SPECIES OF BANGLADESH

Ami Akter, Anowar Hosen, Md. Amjad Hossain, Farzana Khalil and Tonima Mustafa

vol. 49, no. 2

Measuring sustainability performance using an integrated model

Md. Rayhan Sarker, Syed Mithun Ali, Sanjoy Kumar Paul and Ziaul Haque Munim

Measurement (Elsevier), vol. 184, no. 2021, pp. 109931

Social Sustainability Challenges towards Flexible Supply Chain Management: Post-COVID-19 Perspective

Sarker, R.,, Moktadir, M. A., and Santibanez-Gonzalez, E. D. R.,

Global Journal of Flexible Systems Management, Springer

Key performance indicators for a sustainable recovery strategy in healthcare supply chains: COVID-19 pandemic perspective

Rahman, T.,, Moktadir, M. A., and Paul, S. K.,

Journal of Asia Business Studies, Emerald, UK, Emerald

Key supply chain strategies for the post-COVID-19 era: Implications for resilience and sustainability

Paul, S.K.,, Moktadir, M.A., and Ahsan, K.,

The International Journal of Logistics Management, Emerald, UK

Benchmarking the outsourcing factors of third-party logistics services selection: analysing influential strength and building a sustainable decision model

Khan, S.A., Alkhatib, S., Ammar, Z.,, Moktadir, M.A. and and Kumar, A.

Benchmarking: An International Journal, Emerald, Emerald

Operational challenges during a pandemic: an investigation in the electronics industry

9. Paul, S.K., Chowdhury, P., Chowdhury, M.T., Chakrabortty, R.K. and Moktadir, M.A.,

The International Journal of Logistics Management, Emerald, UK, Emerald

Supply chain recovery challenges in the wake of COVID-19 pandemic

Paul, S.K., Chowdhury, P.,, Moktadir, M.A., and Lau, K.H.,

Journal of Business Research, Elsevier, Elsevier

Analyzing the Interactions Among the Challenges to Circular Economy Practices

Bai, C., Ahmadi, H. B.,, Moktadir, M. A., and Kusi-Sarpong, S., and Liou, J. J. H.

IEEE Access, IEEE

COVID-19 pandemic related supply chain studies: a systematic review

Chowdhury, P., Paul, S.K., Kaisar, S., and Moktadir, M.A,

Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 148, Elsevier

Social Sustainability Challenges Towards Flexible Supply Chain Management: Post-COVID-19 Perspective

Md. Rayhan Sarker, Md. Abdul Moktadir and Ernesto D. R. Santibanez-Gonzalez

Global Journal of Flexible Systems Management, Springer

Leather lime fleshing waste: A potential sources of Biodiesel

Banik, S.K., Nafis, T.E., Roy, U.K. and Islam, M.S.

International Conference on Science and Technology for Celebrating the Birth Centenary of Bangabandhu(ICSTB-2021): 6th Conference of Bangladesh Crystallographic Association, Dhaka: 6th Conference of Bangladesh Crystallographic Association, pp. 41-41

cPgChecker: Detection of Plagiarism among Academic and Scientific Writings

Atish Kumar Dipongkor, Rayhanul Islam and Shafiuzzaman, Md and Nashiry, Md Asif and Galib, Syed Md and Mazumder, Khaza Moinuddin

2021 Joint 10th International Conference on Informatics, Electronics & Vision (ICIEV) and 2021 5th International Conference on Imaging, Vision & Pattern Recognition (icIVPR), IEEE, pp. 1-6

Excellency of Hydroxyapatite Composite Scaffolds for Bone Tissue Engineering

Mohammad Shariful Islam, Mohammad Abdulla-Al-Mamun, Alam Khan and Mitsugu Todo

London: IntechOpen: Biomaterials

PEGylated chitin and chitosan derivatives

Chisty AH, Masud RA, Hasan MM, Khan MN, Mallik AK and Rahman MM

In Handbook of chitin and chitosan, Elsevier, pp. (pp. 59-100)

Bioprotein Based IPN Nanoparticles as Potential Vehicles for Anticancer Drug Delivery: Fabrication Technology

Hasan M, Chisty AH, Rahman MM and Khan MN

In Interpenetrating Polymer Network: Biomedical Applications, Springer, pp. (pp. 183-203)

Quality Assessment of Shoe Leather Based on the Properties of Strength and Comfort, Collected from Different Footwear and Leather Industries in Bangladesh

Md. Delwar Hossain, and, Forhad Ahammed Bin Azam and Manjushree Chowdhury

Textile and Leather Review, vol. 4, no. 1, iddr3, Croatia, pp. 30-37

Health Issues of Tannery Workers at Savar, Dhaka, Bangladesh

12. Umme Habiba Bodrun Naher, Dr. Md. Humayun Kabir, Most. Laboni Begum, Md. Rayhan Sarker and Sirajum Munira

12. Umme Habiba Bodrun Naher, Dr. Md. Humayun Kabir, Most. Laboni Begum, Md. Rayhan Sarker and Sirajum Munira, “Health Issues of Tannery Workers at Savar, Dhaka, Bangladesh”, (December 2020), International Journal of Emerging Technologies and Innovative Research, Vol.7, Issue12, page no. 860-878. http://doi.one/10.1729/Journal.30929, vol. 7, no. 12, pp. 860-878

Chemical Supplier Selection Using AHP and TOPSIS

Tusher Sarder, Mahabubur Rahman Khan

Business and Management, vol. 22, no. 11, Business and Management, pp. 50-554

Manufacturing of Novelty Leather from Sheep Stomach

Md. Farhad Ali, Md Tanjid Ahmed Zahid, Md Tanjid Ahmed ZahidTanvir Siddike MoinTanvir Siddike Moin

International Journal of Scientific & Engineering Research, vol. 11, no. 10, pp. 314-318

Turning of Cow Stomach, a Slaughter House By-product into Value-added Products

Umme Habiba Bodrun Naher*, Md. Bazlur Rahman and Md. Tanjid Ahmed Zahid

13. Umme Habiba Bodrun Naher*, Md. Bazlur Rahman and Md. Tanjid Ahmed Zahid, “Turning of Cow Stomach, a Slaughter House By-product into Value-added Products”, (October 2020) vol 11, Issue 10, International Journal of Scientific and Engineering Research, pp.773-778. DOI:10.14299/ijser.2020.10.11, vol. 11, no. 10, pp. 773-778

Investigation of Constraints for the Implementation of Green Supply Chain Management Practices

Tusher Sarder, Mahabubur Rahman Khan

Business and Management, vol. 22, no. 10, Business and Management, pp. 60-67

Synthesis and Application of Graphene Oxide (GO) for Removal of Cationic Dyes from Tannery Effluents

Amal Kanti Deb

Development of conventional ammonia free deliming agents in leather manufacturing in regarding the environmental pollution control

Mst. Sharmin Akter, Md. Abdul Alim, Syed Badrul Islam, Biraj Saha, Md. Abdul Mottalib

Nippon Journal of Environmental Science, Nippon publication

Development of conventional ammonia free deliming agents in leather manufacturing in regarding the environmental pollution control

M. S. Akter, M. A. Alim, S. B. Islam, B. Saha and M. A. Mottalib

Nipp. J. Envon. Sci., vol. 1, no. 5, pp. 1-7

Evaluating Suitability of Glutaraldehyde Tanning in Conformity with Physical Properties of Conventional Chrome-Tanned Leather

Md. Minhaz Uddin, Md. Jawad Hasan, Yead Mahmud, Fatema-Tuj-Zohra and Sobur Ahmed

Textile & Leather Review, vol. 3, no. 3, pp. 135-145

Comparison of aerodynamic behaviour between NACA 0018 and NACA 0012 airfoils at low Reynolds number through CFD analysis

Md. Abdus Shabur, Afnan Hasan and Dr. Mohammad Ali

Advancement in Mechanical Engineering and Technology, vol. 3, no. 2, Zenodo, pp. 1-8

Removal from Synthetic Wastewater Using Biochar Produced from Vegetable Tanned Leather Shaving Dust

14. Choudhury, T. R., Naher, U. H. B., Akter, S., Begum, B. A., & Rahman, M. S.

Journal of Scientific Research and Reports., vol. 26, no. 4, pp. 68-80

Analysis of Risk Factors in Sustainable Supply Chain Management in an Emerging Economy

Moktadir, M.A., and Dwivedi, A., Khan, N.S., Paul, S.K., Khan, Ahmed S., Sultana, R.,

Journal of Cleaner Production, Elsevier

[PDF] from grassrootsinstitute.net Seasonal dynamics of heavy metals in commercially important marine fish from the Bay of Bengal Coast of Bangladesh

Md Sirajul Islam, Md Hasan Imran, Md Humayun Kabir, MMU Noby, Md Enamul Hoq, Sunzida Haque Rimu, Md Safiur Rahman

Grassroots Journal of Natural Resources, vol. 3, pp. 1-15

Evaluating Suitability of Glutaraldehyde Tanning in Conformity with Physical Properties of Conventional Chrome-Tanned Leather

Uddin, Md; Hasan, Md; Mahmud, Yead; Ahmed and Sobur

Textile & Leather Review, vol. 3, no. 3, idd3, pp. 135–145

Removal of Chromium (III) and Other Physical Parameters from Chrome Tan Wastewater and Recovery of Chromium from the Precipitating Sludge

Uddin, Md; Hasan, Md; Islam, Md; Rahaman, Ashiqur; Shamsuddin and Sayed Md

Textile & Leather Review, vol. 3, no. 2, idd3, pp. 64–77

Spectrophotometric Study of Cr(VI) in Shaving Dust, Waste Liquor, and Wet Blue Trimming Samples

Md. Amjad Hossain, Al-Amin Rabbi and Md. Kamrul Hasan

International Journal of Science and Business, vol. 4, pp. 18-27

Assessment of the Carbon Footprint and VOCs Emissions Caused by the Manufacturing Process of the Footwear Industry in Bangladesh

Yead Mahmud,, Md. Rashed-Ul-Islam and Md. Obaidul Islam, Tanvir Siddike Moin, Khandaker Tanzim Rahman

Textile & Leather Review

Synthesis and Application of Graphene Oxide (GO) for Removal of Cationic Dyes from Tannery Effluents

Md. Israil Hossain, Amal Kanti Deb, Md. Zakir Sultan, A. A. Shaikh, Manjushree Chowdhury and Md. Rayhan Sarker

Textile and Leather Review, vol. 3, no. 3, pp. 146-157

IDENTIFYING THE CAUSES OF FOOTWEAR REJECTION AND DEVISING BETTER SOLUTION FOR THE IMPROVEMENT OF FOOTWEAR QUALITY

Farhad Ali, Mukta Rani Sarkar and Arafat Hossain

INTERNATIONAL JOURNAL OF CURRENT RESEARCH, vol. 12, no. 09, pp. 13693-13698

Manufacturing of Novelty Leather from Sheep Stomach

Md. Farhad Ali, Md Tanjid Ahmed Zahid and Tanvir Siddike Moin

International Journal of Scientific & Engineering Research, vol. 11, no. 10, pp. 314-318

Assessment of Typical Heavy Metals in Bangladeshi Tannery Workers’ Hair

Md. Farhad Ali, Nadim Khan and Md Tanjid Ahmed Zahid

International Journal of Research and Innovation in Applied Science (IJRIAS), vol. 5, no. 9, pp. 223-226

Circular Economy Practices in the Leather Industry: A Practical Step towards Sustainable Development

Moktadir, M. A. and Ahmadi, H.B.,, Sultana, R., and Zohra, F. T., Liou, J., Rezaei, J.

Journal of Cleaner Production, Elsevier, vol. 251, no. 1 April 2020, pp. 119737

An investigation of key performance indicators for operational excellence towards sustainability in the leather products industry

Moktadir, M.A., and Dwivedi, A., Rahman, A., Jabbour, C.J.C., Paul, S.K.,, Sultana, R., and Madaan, J.

Business Strategy and the Environment, John Wiley and Sons

Critical success factors for a circular economy: Implications for waste minimization

Moktadir, M.A., and Kumar, A., Ali, S.M., Paul, S.K.,, Sultana, R., and Rezaei, J.

Business Strategy and the Environment, John Wiley and Sons

Analysis of Risk Factors in Sustainable Supply Chain Management in an Emerging Economy

Moktadir, M.A., and Dwivedi, A., Khan, N.S., Paul, S.K., Khan, S.A., and Sultana, R.

Journal of Cleaner Production, Elsevier

Spectrophotometric Study of Cr(VI) in Shaving Dust, Waste Liquor, and Wet Blue Trimming Samples

Md. Amjad Hossain, Al-Amin Rabbi and Md. Kamrul Hasan

International Journal of Science and Business, vol. 4, pp. 18-27

Towards Sustainable Supply Chain Management: A Case of Leather Industry

M. Hedaitul Islam, Md Rayhan Sarker, Md. Israil Hossain, Kauser Ali and K. M. Asadun Noor

Journal of Operations and Strategic Planning, vol. 03, no. 01, pp. 1-18

Reduction of Multiple Move Method Suggestions Using Total Call-Frequencies of Distinct Entities

Atish Kumar Dipongkor, Rayhanul Islam, Nadia Nahar, Iftekhar Ahmed, Kishan Kumar Ganguly, S.M. Arif Raian and Abdus Satter

International Journal of Information Engineering and Electronic Business, vol. 12, no. 4, pp. 21-29

Industry 4.0 enablers for a cleaner production and circular economy within the context of business ethics: A study in a developing country

Shayganmehr, M., Kumar, A., Garza-Reyes, J.A., and Moktadir, M.A.,

Journal of Cleaner Production, Elsevier, no. 125280

Challenges of Small-and Medium-Sized Enterprises (SMEs) in Business Growth: A Case of Footwear Industry

AKM Hedaitul Islam, Md. Rayhan Sarker, Md Israil Hossain, Kauser Ali and KM Asadun Noor

Journal of Operations and Strategic Planning, pp. 1-25

Evaluating sustainable drivers for social responsibility in the context of ready-made garments supply chain

Kumar, A.,, Moktadir, M. A. and Liman, Z. R., Gunasekaran, A., Hegemann, K., & Rehman Khan, S. A.,

Journal of Cleaner Production, Elsevier, vol. 248, no. 1 March 2020, pp. 119231

Behavioural factors on the adoption of sustainable supply chain practices

Kumar, A.,, Moktadir, M.A., and Khan, S.A.R, Garza-Reyes, J.A., Tyagi, M., Kazançoğlu, Y.

Resources, Conservation & Recycling, Elsevier, vol. 158, no. July 2020, pp. 104818

Circular Economy Practices in the Leather Industry: A Practical Step towards Sustainable Development

Moktadir, M. A. and Ahmadi, H.B., Sultana, R., Zohra, F. T., Liou, J., Rezaei, J.,

Journal of Cleaner Production, Elsevier, vol. 251, no. 1 April 2020, pp. 119737

Analyzing Barriers and Strategies for Implementing Lean Six Sigma: A Context of Indian SMEs

Gaikwad, S.K., Paul, A.,, Moktadir, M.A., and Paul, S.K., Chowdhury, P.,

Benchmarking: an International Journal, Emerald

An investigation of key performance indicators for operational excellence towards sustainability in the leather products industry

Moktadir, M.A., and Dwivedi, A., Rahman, A., Jabbour, C.J.C., Paul, S.K., Sultana, R., Madaan, J.,

Business Strategy and the Environment, John Wiley and Sons

Critical success factors for a circular economy: Implications for waste minimization

Moktadir, M.A., and Kumar, A., Ali, S.M., Paul, S.K., Sultana, R., Rezaei, J.,

Business Strategy and the Environment, John Wiley and Sons

A case study on strategies to deal with the impacts of COVID-19 pandemic in the food and beverage industry

Chowdhury, M.T., Sarkar, A., Paul, S.K., and Moktadir, M.A.,

Operations Management Research, Springer

Modeling Drivers to Big Data Analytics in Supply Chains

Siddique, M.N.A., Hasan, K.W., Ali, S.M., Moktadir, M.A., and Paul, S.K., Kabir, G.,

Journal of Production Systems & Manufacturing Science

Improving supply chain sustainability in the context of COVID-19 pandemic in an emerging economy: Exploring drivers using an integrated model

Karmaker, C. L., Ahmed, T., Ahmed, S., Ali, S. M.,, Moktadir, M. A., and & Kabir, G.

Sustainable Production and Consumption, Elsevier, vol. 26, no. April 2021, pp. 411-427

ABMMRS Eradicator: Improving Accuracy in Recommending Move Methods for Webbased MVC Projects and Libraries Using Method’s External Dependencies

Atish Kumar Dipongkor, Iftekhar Ahmed, Rayhanul Islam, Nadia Nahar, Abdus Satter and Md. Saeed Siddik

International Journal of Software Engineering and Knowledge Engineering (IJSEKE), vol. 30, no. 09, pp. 1289 - 1307

A Novel Approach for Converting N-Dimensional Dataset into Two Dimensions to Improve Accuracy in Software Defect Prediction

Rayhanul Islam*, Abdus Satter, Atish Kumar Dipongkor, Md. Saeed Siddik and Kazi Sakib

Journal of Software, vol. 15, no. 6, pp. 147-162

Assessment of Essential Metals in Selected Fish Feeds and Cultivated Fish Species in Bangladesh and their Impacts on Human Body

B. Saha, M. A. Mottalib and A. N. M. Al-razee

Acta Scientific Agriculture, vol. 4, no. 11, pp. 30-35

Enhanced epoxy/GO composites mechanical and thermal properties by removing air bubbles with shear mixing and ultrasonication.

Chisty AH, Mallik AK, Robel FN, Shahruzzaman M,, Haque P,, Hossain KS, Khan RA and Rahman MM

ChemistrySelect, vol. 4, no. 38, Wiley, pp. 11417-25

Tannery solid waste into wealth by non-edible gelatin production from raw trimmings

Md. Saidur Rahman Shakil, Sobur Ahmed, and Estehad Pathan

European Journal of Engineering Research and Science, vol. 4, no. 10, pp. 167-172

Utilization of limed flesh through fat extraction and soap preparation

Estehad Pathan, Sobur Ahmed, and Md. Saidur Rahman Shakil

European Journal of Engineering Research and Science, vol. 4, no. 10, pp. 198-202

Potential of Functionalized-Rice-Husk Ash for Purification of Tannery-yard Liming Effluent

Md. Abdulla-Al-Mamun, and Banya Rani Goush

Journal of Scientific Research, vol. 11, no. 3, Banglajol, pp. 373-381

Key factors for energy-efficient supply chains: Implications for energy policy in emerging economies

Md Abdul Moktadir, Syed Mithun Ali, Charbel Jose Chiappetta Jabbour, Ananna Paul, Sobur Ahmed, Razia Sultana, Towfique Rahman,

Energy, Elsevier, pp. 189;116129

Antifungal efficacy of neem leaves (Azadirachta indica) and mahagony fruits-bark (Swietenia mahagoni) extracts on leather shoes

Md. Abdulla-Al-Mamun and Rakibul Hasan, Md. Rubel Ahmed, Adhir Chandra Paul, and Rajon Kumar Raha

Bangladesh Journal of Scientific and Industrial Research (BJSIR), vol. 54, no. 3, pp. 257-262

Manufacturing of novelty leather from goat stomach

Md. Farhad Ali, Adiba Fara, Umme Habiba Bodrun Naher, Kawsar Akhtar

INTERNATIONAL JOURNAL OF CURRENT RESEARCH, vol. 11, no. 07, pp. 5156-5160

Manufacturing of Novelty Leather from goat stomach

Md. Farhad Ali, Adiba farah, Umme Habiba Bodrun Naher and Kawsar Akhtar

International Journal of Current Research, vol. 11, pp. 5156-5160

Enhancement of waterproofing properties of finished upper leather produced from Bangladeshi cow hides

Abrar Shahriar, Fatema-Tuj-Zohra, A. B. M. Wahid Murad, Sobur Ahmed

European Journal of Engineering Research and Science, vol. 4, no. 7

Dual cocatalysts induced photocurrent enhancement of LaTiO2N photoanode

Md. Abdulla-Al-Mamun, and Mohammad Mizanur Rahman, Sayed Md. Shamsuddin

Materials Letters, vol. 245, ELSEVIER, pp. 147-150

Removal of Toxicants from Leather Industrial Wastewater Using Sawdust Filter Media and Ferric Oxide Coagulant

Aamal Kanti Deb

Removal of Toxicants from Leather Industrial Wastewater Using Sawdust Filter Media and Ferric Oxide Coagulan

Manjushree Chowdhury, Md. Israil Hossain, Amal Kanti Deb, Tapan Kumar Biswas, Forhad Ahammed Bin Azam and Md. Delwar Hossain

Oriental Journal of Chemistry, vol. Vol. 35, No.(2), pp. 597-604

Investigation and evaluation of the quality features related to comfort of casual shoes in Bangladeshi leading retail brands using physical and chemical standard test methods

Amal

Effects of compressive ratio and sintering temperature on mechanical properties of biocompatible collagen/hydroxyapatite composite scaffolds fabricated for bone tissue engineering

Md. Shariful Islam, A. M. Zahidur Rahman, M. H. Sharif, Alam Khan,, Md. Abdulla-Al-Mamun, and Mitsugu Todo

Journal of Asian Ceramic Societies, vol. 7, no. 2, Taylor & Francis, pp. 183-198

Assessment of Physicochemical Properties of Surface Water of Mokeshbeel, Gazipur, Bangladesh:

N. Jannat, M. A. Mottalib and M. N. Alam

HSOA Journal of Environmental Science: Current Research, vol. 2, no. -, pp. 1-6

Assessment of heavy metals in sediments of Shitalakhya River, Bangladesh

A. N. M. Al-Razee, M. N. Abser, M. A. Mottalib, M. S. Rahman and N. Cho

Analytical Science & Technology, vol. 32, no. 5, pp. 210-216

Levels of Heavy Metals in Soil and Vegetables and Health Risk Assessment

Most Laboni Begum, Umme Habiba Bodrun Naher, Md. Razeb Hosen and Ashiqur Rahaman

International Journal of Scientific and Technology Research, vol. Volume 8, no. Issue 7

Removal of Dye Basic Black 7 (BB7) from Tannery Wastewater Using Convenient Modified Graphene Oxide (MGO)

Md Israil Hossain, Amal Kanti Deb, Manjushree Chowdhury, Mehrez El-naggar and Md. Rayhan Sarker

Global Scientific Journals, vol. 7, no. 9, pp. 427-432

An Investigation into Chemical Parameters of Water of Dhaleswari- A River alongside Tannery Village of Bangladesh

Sarmin Akter, Md. Kamrujjaman, Md. Rashed-Ul-Islam, Badhon Saha

INTERNATIONAL JOURNAL OF SCIENCES (IJSCIENCES), vol. 8, no. May 2019, pp. 159-164

Framework for Evaluating Risks in Food Supply Chain: Implications in Food Wastage Reduction

Ali, S.M., Moktadir, M.A. and Kabir, G. ,Chakma, J., Rumi, M.J.U., Islam, M.T.,

Journal of Cleaner Production, Elsevier, vol. 228, no. 10 August 2019, pp. 786-800

INVESTIGATION AND EVALUATION OF THE QUALITY FEATURES RELATED TO COMFORT OF CASUAL SHOES IN BANGLADESHI LEADING RETAIL BRANDS USING PHYSICAL AND CHEMICAL STANDARD TEST METHODS

Md. Rayhan Sarker, Amal kanti deb, Manjushree Chowchury and Md Israil Hossain

Leather and Footwear Journal, vol. 19

Reduction of Color Intensity from Textile Dye Wastewater Using Microorganisms: A Review

Md. Rayhan Sarker, Manjushree Chowdhury and Amal Kanti Deb

International Journal of Current Microbiology and Applied Sciences, vol. 8, no. 2

Key factors for energy-efficient supply chains: Implications for energy policy in emerging economies

Moktadir M.A., and Ali S.M., Jabbour C.J.C., Paul A., Ahmed S.,, Sultana R., and Rahman, T.,

Energy, Elsevier, vol. 189, no. 15 December 2019, pp. 116129

An Environment Aware Learning-based Self-Adaptation Technique with Reusable Components

Kishan Kumar Ganguly, Md. Saeed Siddik, Rayhanul Islam and Kazi Sakib

International Journal of Modern Education and Computer Science (IJMECS), pp. 53-64

Barriers to big data analytics in manufacturing supply chains: A case study from Bangladesh

Moktadir, M.A., Ali, S. M., Paul, S.K. and Sukla, N.

Computers & Industrial Engineering, Elsevier, vol. 128, no. February 2019, pp. 1063-1075

Quality of Physics teaching up to the higher secondary level in bangladesh. From the undergraduate students' perspective.

Salahuddin Haowlader, Humayra Ferdous and Shahidul Islam

Bangladesh Journal of Physics

Production of Poultry Feed from Domestic Animal Blood

A.B.M Wahid Murad, Md. Zubayer Alam Bari and Fatema-Tuj-Zohra

Int. J. Eng. Sci. & Comp, vol. 9, no. 5, pp. 21979-21982

Translocation of heavy metals from in dustry into vegetables and crops through water and soil of Mokesh Beel in Bangladesh and their impact on human body

M. S. Ahmed, M. M. H. Biswas, M. A. Mottalib, M. N. Alam and M. Khan

IOSR Journal of Environmental Science, Toxicology and Food Technology, vol. 13, no. 5,I, pp. 59-71

Enablers of Social Sustainability in the Supply Chain: An Example of Footwear Industry from an Emerging Economy

Munny, A.A., Ali, S.M., Kabir, G.,, Moktadir, M.A., and Rahman, T., Mahtab, Z.

Sustainable Production and Consumption, Elsevier, vol. 20, no. October 2019, pp. 230-242

An innovative decision-making framework for evaluating transportation service providers based on sustainable criteria

Paul, A.,, Moktadir, M.A., and Paul, S.K.,

International Journal of Production Research, Taylor and Francis, UK

Environmental sustainability assessment in supply chain: An emerging economy context

Suhi, S. A., Enayet, R., Haque, T., Ali, S.M.,, Moktadir, M.A., and Paul, S.K.,

Environmental Impact Assessment Review, Elsevier, vol. 79, no. November 2019, pp. 106306

Evaluating the barriers to green supply chain management implementation: An example from an emerging economy

Rahman, T., Ali, S.M.,, Moktadir, M.A., and Kusi-sarpong, S.,

Production Planning & Control, Taylor and Francis, UK, vol. 31, no. 8, pp. 673-698

Antecedents for greening the workforce: Implications for green human resource management

Moktadir, M.A., and Dwivedi, A., Ali, S. M., Paul, S. K., Kabir, G., Madaan, J.,

International Journal of Manpower, Emerald

Key factors for energy-efficient supply chains: Implications for energy policy in emerging economies

Moktadir M.A., and Ali S.M., Jabbour C.J.C., Paul A., Ahmed S., Sultana R., Rahman, T.,

Energy, Elsevier, vol. 189, no. 15 December 2019, pp. 116129

Examining barriers to reverse logistics practices in the leather footwear industry

Moktadir, M. A., and Rahman, T., Ali, S. M., Nahar, N., & Paul, S. K.,

Annals of Operations Research, Springer, pp. 1–32

Determination of toxic and essential metals in different organs and species of consumer chickens in Bangladesh

G. Zilani, M. A. Mottalib, A. N. M. Al-Razee, T. Ahmed and R. Chakraborty

J. Bang. Chem. Soc., vol. 31, no. 2, pp. 1-10

Cost-Effective Different Ladies Jewelry from Leather Products Wastages

Md. Abdulla-Al-Mamun, and Adhir Chandra Paul, Rajan Kumar Raha, Tasmin Wazeda Binty

International Journal of Engineering Research & Technology, vol. 8, no. 2, pp. 154-158

An Environment Aware Learning-based Self-Adaptation Technique with Reusable Components

Kishan Kumar Ganguly, Md. Saeed Siddik, Rayhanul Islam and Kazi Sakib

International Journal of Modern Education and Computer Science (IJMECS), pp. 53-64

Determination of toxic and essential metals in different organs and species of consumer chickens in Bangladesh

G. Zilani, M. A. Mottalib, A. N. M. Al-Razee, T. Ahmed and R. Chakraborty

J. Bang. Chem. Soc., vol. 31, no. 2, pp. 1-10

Removal of Toxicants from Leather Industrial Wastewater Using Sawdust Filter Media and Ferric Oxide Coagulant

Manjushree Chowdhury, Md. Israil Hossain, Amal Kanti Deb, Tapan Kumar Biswas, Forhad Ahammed Bin Azam and Md. Delwar Hossain

ORIENTAL JOURNAL OF CHEMISTRY, vol. 35, no. 2, pp. 597-604

Manufacturing of Movelty Leather from goat stomach

Md. Farhad Ali, Adiba farah, Umme Habiba Bodrun Naher and Kawsar Akhtar

International Journal of Current Research, vol. volume 11, no. Issue 7, pp. 5156-5160

Heavy metal toxicity from the leather industry in Bangladesh: a case study of human exposure in Dhaka industrial area

Md. Mahamudul Hasan, Shahadat Hosain, Pinku Poddar, ABM Alauddin Chowdhury, Estiner W. Katengeza and Uttam Kumar Roy

@ Springer Nature Switzerland AG 2019, vol. (2019) 191: 530, no. 01-08-2019, pp. pp-530(1) to 530(9)

Vertical Integration: It’s Benefit in Footwear Supply Chain -A toolkit for profit maximization

Liman M.Z.I,, Moktadir, M.A.* and Rahman, T.

Germany: Scholar's Press

Challenges Evaluation for Adoption of SCP Practices in Footwear Industry of Bangladesh: A DEMATEL Approach

Kausar Ali, Md. Abdul Moktadir, Aftab Ali Shaikh, Amal Kanti Deb, Md. Rashed-Ul-Islam

Journal of Operations and Strategic Planning, vol. 2, no. I, pp. 168-184

Prioritization of Drivers of Corporate Social Responsibility in The Footwear Industry in an Emerging Economy: A Fuzzy AHP Approach

Moktadir, M.A., Towfique, R., Jabbour, C. J. C., Ali, S.M. and Kobir, G.,

Journal of Cleaner Production, Elsevier, vol. 201, no. 10 November 2018, pp. 369-381

Assessment of Noise, Temperature, Light Intensity And Their Impacts on Workers In Footwear And Leather Products Industries of Bangladesh

Amal Kanti Deb, Manjushree Chowdhury, Md. Israil Hossain and Md. Rayhan Sarker,

IOSR Journal of Environmental Science, Toxicology and Food Technology (IOSR-JESTFT), vol. 12, no. 3 (1), pp. 25-31

Assessing challenges for implementing Industry 4.0: Implications for Process Safety and Environmental Protection

Moktadir, M.A., Ali, S.M., Kusi-Sarpong, S. and Shaikh, M.A.A.

Process Safety and Environmental Protection, Elsevier, vol. 117, no. July 2018, pp. 730-741

Challenges and Prospects of Tannery By-product Industries ( Glue, Gelatin, Poultry and Fish Feed Industries) in Bangladesh

Nahar, Umme Habiba Bodrun, Islam,Md. Rashidul, Mia,Md Abu Sayid and Ali, Md.Farhad

International Journal of science, Engineering and Technology Research (IJSETR), vol. 7, pp. 837-841

Decision modeling of risks in pharmaceutical supply chains

Moktadir, M.A., Ali, S.M., Kumar Mangla, S., Sharmy, T.A., Luthra, S., Mishra, N. and Garza-Reyes, J.A.

Industrial Management & Data Systems, Emerald, UK, vol. 118, no. 7, pp. 1388-1412

Modeling the interrelationships among barriers to sustainable supply chain management in leather industry

Moktadir, M.A., Ali, S.M., Rajesh, R. and Paul, S.K.

Journal of Cleaner Production, The Netherland, Elsevier, vol. 181, no. 20 April 2018, pp. 631-651

Drivers to sustainable manufacturing practices and circular economy: a perspective of leather industries in Bangladesh

Moktadir, M.A, Rahman, T., Rahman, M. H., Ali, S. M. and Paul, S. K.

Journal of Cleaner Production, Elsevier, vol. 174, no. 10 February 2018, pp. 1366-1380

Challenges Evaluation for Adoption of SCP Practices in Footwear Industry of Bangladesh: A DEMATEL Approach

Ali, K.,, Moktadir, M. A.*, Shaikh, A. A.,, Deb, A. K. and Rashed-Ul-Islam, M.

Journal of Operations and Strategic Planning, SAGE, vol. 1, no. 2, pp. 168-184

Assessment of Influential Factors of Purchasing Gent's Shoes-Understanding the Basic Comfort Properties.

Amal Kanti DEB, Md. Aftab Ali SHAIKH, Md. Rayhan SARKER and Md. Israil HOSSAIN

Leather and Footwear Journal, vol. 18, no. 01, pp. 13-24

Study of ZnO-TiO2 composite photocatalyst mediated photodegradation of Eosin Yellow

Md. Amjad Hossain, M. A. B. Samad, M. D. H. Khan, N. J. Ara and T.S.A. Islam

IOSR Journal of Environmental Science, Toxicology and Food Technology, vol. 12, pp. 58-67

Investigation and Evaluation of the Quality Features Related to Comfort of Casual Shoes in Bangladeshi Leading Retail Brands Using Physical and Chemical Standard Test Methods

Md. Rayhan SARKER, Amal Kanti DEB, Manjushree CHOWDHURY and Md. Israil HOSSAIN

Leather and Footwear Journal, vol. 19, no. 01, pp. 11-20

Identifying Barriers for Implementing Green Supply Chain Management (GSCM) in Footwear Industry of Bangladesh: A Delphi Study Approach

Md. Rayhan SARKER, Faruk AHMED, Amal Kanti DEB and Manjushree CHOWDHURY

Leather and Footwear Journal, vol. 18, no. 03, pp. 175-186

Assessment of selected heavy metals concentration in different brands of fish feed available in Bangladesh

B. Saha, M. A. Mottalib and A. N. M. Al-Razee

J. Bang. Aca. Sci., vol. 42, no. 2, pp. 207-210

Removal of Chromium From Tannery Waste Liquor by Using Lime Liquor in Regarding the Reduction of Environmental Pollution and Reuse it in Leather Production

Sayed Badrul Hasan, Md. Abdul Mottalib, Arnob Hore, Noor Mohammed and Fatema-Tuj-Zohra

J. Env. Sci. Tox. & Food Tech., vol. 12, no. 10, pp. 1-6

Estimation of trace metals in different organs and species of consumer chickens in Bangladesh

M. A. Mottalib, G. Zilani, T. I. Suman, T. Ahmed and M. S. Islam

J. Health and Pollution, vol. 8, no. 20, pp. 1-10

Determination of heavy metals in cultivated fresh water fish species and possible human health risk assessment in Bangladesh

M. M. H. Biswas, M. A. Mottalib and M. N. Alam

J. Bang. Chem. Soc., vol. 30, no. 1, pp. 10-16

Removal of chromium from tannery waste liquor by using lime liquor in regarding the reduction of environmental pollution and reuse it in leather production

S. B. Hasan, M. A. Mottalib, A. Hore, N. Mohammed and Fatema-tuj-zohra

IOSR J. Env. Sci, Toxicol. and Food Tech., 2018, 12(10, I), 01-06., vol. 12, no. 10,I, pp. 01-06

Study of ZnO-TiO2 composite photocatalyst mediated photodegradation of Eosin Yellow

M. A. Hossain, M. A. B. Samad, M. D. H. Khan, N. J. Ara and T.S.A. Islam

” IOSR Journal of Environmental Science, vol. 12, pp. 58-67

Workers’ Health and Workplace Condition Evaluation (WCE) Of the Footwear Industries in Bangladesh

Amal Kanti Deb, Manjushree Chowdhury, Forhad Ahammed Bin Azam and Md. Israil Hossain

IOSR Journal of Environmental Science, Toxicology and Food Technology (IOSR-JESTFT), vol. 12, no. 8(1), pp. 7-13

Barriers to Reverse Logistics in the Computer Supply Chain Using Interpretive Structural Model

Ali, S.M., Arafin, A., Moktadir, M.A., Rahman, T. and Zahan, N.

Global Journal of Flexible Systems Management, Springer, vol. 19, no. Supplement 1, pp. 53–68

Challengesr, and Prospects of Tannery By-product Industries (Glue, Gelatin, Poultry and Fish Feed Industries) in Bangladesh

UMME HABIBA BODRUN NAHER and MD. RASHIDUL ISLAM, MD. ABU SAYID MIA AND MD. FARHAD ALI

International Journal of Science, Engineering and Technology Research, vol. Volume 7, no. Issue 12, pp. Page No. 837-841

Hazard and risk analysis of heavy metals in hair and nail due to environmental contamination in Bangladesh

MM Hasan, Uttam Kumar Roy, J Nakayama and T IIMOTO

51st Annual Meeting of Japan Health Physics Society in Sapporo, Japan, Sapporo, Japan, pp. 54

How to Improve Productivity by Work Study Technique

Md. Abdul Muktadir, Sobur Ahmed and Fatema-Tuj-Zohra

Mauritius: Scholar’s Press, OmniScriptum publishing group

How to Improve Productivity by Work Study Technique

Md. Abdul Muktadir, Sobur Ahmed and Fatema-Tuj-Zohra

Mauritius: Scholar’s Press, OmniScriptum publishing group

Stock Taking of the Existing Technologies for the Potential Entrepreneurs of Leather Sector

Sobur Ahmed

Dhaka: Small and Medium Enterprise Foundation

Transportation Mode Selection Framework for Apparel Industries: A Fuzzy AHP Approach

Ali, S.M., Kabir, G. and Moktadir, M.A.,

In Selected Issues in Economics and Finance,, ed. Selim Başar, A. Alkan Çelik and Turgut Bayramoglu, Cambridge, UK: Cambridge Scholar Publishing, Cambridge, UK., ISBN-13: 978-1-5275-1143-9., pp. 234-254

Chromium from tannery waste in poultry feed: A potential cradle to transport human food chain

Sobur Ahmed*, Fatema-Tuj-Zohra, Md. Shiblee Hider Khan, Md. Abul Hashem

Cogent Env. Sci.

Electron Beam Ni-layer Deposited LaTiO2N Photoanodes for the Enhanced Photoelectrochemical Performance of Water Oxidation

Md. Abdulla-Al-Mamun

iEEE, iEEE, pp. 1-7

Productivity Improvement by Work Study Technique: A Case Study on Leather Products Industry of Bangladesh

Md. Abdul Moktadir, Sobur Ahmed, Fatema-Tuj-Zohra and Razia Sultana

Industrial Engineering and Management

Assessment of physicochemical parameters of the surface water of Shitalakhya river polluted by paper mills effluent

A. N. M. Al-Razee, M. N. Abser, M. A. Mottalib and M. S. Rahman

J. Bang. Chem. Soc., 2017, 29(2), 1-11., vol. 29, no. 2, pp. 1-11

Comparative study of water quality of Buriganga and Balu river, Dhaka, Bangladesh

M. A. Mottalib, S. Roy, M. S. Ahmed, M. Khan and A. N. M. Al-Razee

Int. J. Curr. Res., vol. 9, no. 10, pp. 59132-59137

Investigation onto Soil Salinity of Hazaribagh Tanning Industrial Area, Dhaka, Bangladesh

M. A. Mottalib, A. Sultana, M. M. Rahman, G. Zilani, S. Chowdhury and S. Hoque

IOSR J. Env. Sci, Toxicol. and Food Tech., vol. 11, no. 8, pp. 44-49

Chromium from tannery waste in poultry feed: A potential cradle to transport human food chain

Sobur Ahmed, Fatema-Tuj-Zohra, Md. Shiblee Hider Khan and Md. Abul Hashem

Cogent Env. Sci., vol. 3, pp. 1-7

Reduction of pollutants of tannery wastewater by using acidic waste liquor

M. A. Mottalib, M. M. Alam, A. Afrose and A. N. M. Al-Razee

IOSR J. Env. Sci, Toxicol. and Food Tech., vol. 11, no. 3, pp. 28-33

Productivity Improvement by Work Study Technique: A Case Study on Leather Products Industry of Bangladesh

Md. Abdul Moktadir, Sobur Ahmed, Fatema-Tuj-Zohra and Razia Sultana

Industrial Engineering and Management, vol. 6, no. 1, pp. 1-11

Study on Heavy Metals ( Zine and Lead) in Drinking Water of Tannery Area, Adjacent Areas and Outside Village Areas.

Hasan M,, Begum L, Hosain S, Poddar P, Chowdhury A and Farhad Ali

L Envirn Anal Toxicol, vol. 7, pp. 433

Chromium from tannery waste in poultry feed: A potential cradle to transport human food chain

Sobur Ahmed, Fatema-Tuj-Zohra, Md. Shiblee Hider Khan and Md. Abul Hashem

Cogent Environmental Science, vol. 3, pp. 1-7

Investigation of Heavy Metals in Various Genre of Chicken Tissue in Dhaka City, Bangladesh

Hossain Md. Sakhawat, Rahman Md. Mizanur, Ali Md. Farhad and Nasif Tahsin Eahteshum

JECET, vol. 6, no. 4, pp. 394-403

A package-based clustering approach to enhance the accuracy and performance of software defect prediction

Rayhanul Islam and Kazi Sakib

International Journal of Software Engineering, Technology and Applications, pp. 1-21

Bioaccumulation of Mercury in fish species of different tropic levels

Mohammad Shoeb, Md. Amjad Hossain, Md. Golam Kibria, Tonima Mustofa and Nilufar Nahar

Journal of Food Science and Engineering, vol. 7, pp. 363-367

Productivity Improvement by Work Study Technique: A Case on Leather Products Industry of Bangladesh

Moktadir, M. A.*, Ahmed, S., Tuj Zohra, F. and Sultana, R.

Industrial Engineering & Management, vol. 6, no. 1, pp. 207

A package-based clustering approach to enhance the accuracy and performance of software defect prediction

Rayhanul Islam and Kazi Sakib

International Journal of Software Engineering, Technology and Applications, pp. 1-21

Bioaccumulation of Mercury in fish species of different trophic levels

Mohammad Shoeb, Md. Amjad Hossain, Md. Golam Kibria, Tonima Mustofa and Nilufar Nahar

Journal of Food Science and Engineering, vol. 7, pp. 363-367

Productivity Improvement by Work Study Technique: A Case Study on Leather Products Industry of Bangladesh

Md. Abdul Moktadir, Sobur Ahmed, Fatema-Tuj-Zohra and Razia Sultana

Industrial Engineering and Management, vol. 6, no. 1, pp. 1-11

Pollution Level Caused by the Effluents of Leather Industry and their Abatement

Umme Habiba Bodrun Naher and Mahamudul Hasan M and Farhad Ali M

Journal of Environmental Analytical Chemistry, vol. Volume 4, no. Issue 3

Removal 0f Chromium from Tannery Effluent Using Plant Bark and Leaf

Hosen, Md. Razib; Rahman, Ashiqur; Hena, Moriom Akter; Hasan, Md. Mehedi;, Naher, Umme Habiba Bodrun and Moniruzzaman, Mohammad

Energy and Environment Focus, vol. Vol 6, no. Issue 2, pp. Page No. 139-144

Electron Beam Ni-layer Deposited LaTiO2N Photoanodes for the Enhanced Photoelectrochemical Performance of Water Oxidation

Md. Abdulla-Al-Mamun, and Kazunari Domen

The 3rd International Conference on Electrical Information and Communication Technology (EICT, Khulna, Bangladesh, pp. 1-7

ALTERNATIVE NATURAL-SOURCES FUNGICIDE FOR PREVENTING THE FUNGAL GROWTH ON LEATHER SHOE: EXTRACTED FROM NEEM (AZADIRACHTA INDICA) LEAVES AND MAHAGONY (SWIETENIA MAHAGONY) FRUITS BARK

Md. Abdulla-Al-Mamun, and Rakibul Hasan, Md. Rubel Ahmed, Rajon Kumar Raha

The International Conference on Mechanical Engineering and Renewable Energy 2017 (ICMERE2017), Chittagong, Bangladesh, pp. PI-104

Examining Critical Success Factors to Humanitarian Supply Chain of Bangladesh: An Interpretive Structural Modeling (ISM) Approach

Moktadir, M. A., Rahman, T., and Ali, S. M.

International Conference on Mechanical, Industrial and Materials Engineering 2017 (ICMIME2017), RUET, Rajshahi, Bangladesh., pp. 68

Critical Success Factors in Implementing Green Supply Chain Management Practices in Footwear Industry in Bangladesh – An Interpretive Structural Modeling Approach

Moktadir, M. A., Rahman, T. and Ali, S. M.

1st International Conference on Buinsess and Management (ICBM),, Dhaka, Bangladesh, pp. pp. 447-452

Foot Last Footwear: Structure, types and defects

Noor Mohammad

Dhaka

Highly Efficient Water Oxidation Photoanode Made of Surface Modified LaTiO2N Particles

Seiji Akiyama, Mamiko Nakabayashi, Naoya Shibata, Tsutomu Minegishi, Yusuke Asakura,, Md. Abdulla-Al-Mamun, and Takashi Hisatomi, Hiroshi Nishiyama, Masao Katayama, TaroYamada, and Kazunari Domen

Small, vol. 12, no. 39, pp. 5468-5476

Nonconventional Use of Basic Chromium Sulphate for Wet Blue Leather Production- An Attempt for Abatement of Pollution

A.B.M. Wahid Murad, Ananya Chakrobarty, Fatema-Tuj-Zohra and Sobur Ahmed*

World Journal of Engineering Research and Technology, vol. 2, no. 3, pp. 60-72

Heavy metal concentrations in contaminated soil and vegetables of tannery area in Dhaka, Bangladesh

M. A. Mottalib, S. H. Somoal, M. A. A. Shaikh and M. S. Islam

Int. J. Curr. Res., vol. 8, no. 5, pp. 30369-373

Assessment of lead in water, sediments, soils and vegetables grown on the bank of Shitalakhya river: Bangladesh,

A. N. M. Al-razee, M. N. Abser, M. A. Mottalib and M. Z. H. Ansary

J. Bang. Aca. Sci., vol. 40, no. 2, pp. 91-99

Assessment of Physico-Chemical Properties of Surface Water in Shitalakhya River, Polash, Narsingdi, Bangladesh

M. A. Mottalib, A. N. M. Al-Razee, M. N. Abser and E.U. M. Aman

Int. J. Adv. Res., vol. 4, no. 8, pp. 915-924

Nonconventional Use of Basic Chromium Sulphate for Wet Blue Leather Production- An Attempt for Abatement of Pollution

A.B.M. Wahid Murad, Ananya Chakrobarty, Fatema-Tuj-Zohra and Sobur Ahmed

World J. Eng. Res. Tech., vol. 2, no. 3, pp. 60-72

Low Cost Adsorbent for Mitigation of Water Pollution Caused by Tannery Effluents at Hazaribagh

Al Mizan, Fatema-Tuz-Zohra, Sobur Ahmed, Md. Nurnabi and Md. Zahangir Alam

Bangladesh Journal of Scientific and Industrial Research, vol. 51, no. 3, pp. 215-220

Chiral diphosphine derivatives of alkylidyne tricobalt clusters-A comparative study of different cobalt carbonyl catalysts for (asymmetric) intermolecular Pauson-Khand reaction

M. A. Mottalib, M. Haukka and E. Nordlander

Polyhedron, vol. 103, no. Part B, pp. 275-282

Assessment of heavy metals in tannery waste-contaminated poultry feed and their accumulation in different edible parts of chicken

M. A. Mottalib, A. Sultana, S. H. Somoal and M. N. Abser

IOSR J. Env. Sci, Tox. and Food Tech., vol. 10, no. 11, pp. 72-78

Low Cost Adsorbent for Mitigation of Water Pollution Caused by Tannery Effluents at Hazaribagh

Al Mizan, Fatema-Tuj-Zohra, Sobur Ahmed, Md. Nurnabi and Md. Zahangir Alam

Bangladesh J. Sci. Ind. Res., vol. 51, no. 3, pp. 215-220

Relative study of heavy metal contamination in fishes of Buriganga River due to untreated tannery effluent and in fishes from another source in Bangladesh”, International Journal of Current Research

Khairul Bashar, JahanSadiaAfroze, Md. Farhad Ali and AshiqurRahaman

International Journal of Current Research, vol. 8, no. 10, pp. 4035-40403

A Comparative Study of Heavy Metal Concentration in Different Layers of Tannery Vicinity Soil and Near Agricultural Soil

Rahaman, A., Afroze, J.S., Bashar, K., and Ali, Md. F

American Journal of Analytical Chemistry, vol. 7, pp. 880-889

Evaluation on Economic Loss for Rejection of Finished Leather in Bangladesh

Md. Arafat Hossain,, ,, Mukta Rani Sarkar, Md. Farhad Ali and Uttam Kumar Roy

Universal Journal of Environmental Research and Technology, vol. 6, no. 2, pp. 91-96

Increasing Power Consumption Efficiency of Smart Devices Using Usage Pattern (UIPE)

Md. Arif Ibne Ali, Rayhan Hossain, Rayhanul Islam and Rayhanur Rahman

International Journal of Software & Hardware Research in Engineering (IJSHRE)

DDT and its Metabolites in freshwater fish samples

Md. Amjad Hossain, Md. Golam Kibria, Mohammad Shoeb and Nilufar Nahar

Journal of Food Science and Engineering, vol. 6, pp. 344-350

Prevalence of Health Diseases among Bangladeshi Tannery Workers and associated risk factors with workplace investigation

Mahamudul Hasan MD, Hossain S, Asaduzzaman AM, Houque MA and Roy UK

Journal of Pollution Effect and Control, vol. 4, no. 4, pp. pp-1 to 3

Evaluation on Economic Loss for Rejection of Finished Leather in Bangladesh

Md. Arafat Hossain, Mukta Rani Sarker, Md. Farhad Ali and Uttam Kumar Roy

Evaluation on Economic Loss for Rejection of Finished Leather in Bangladesh, vol. 6, no. 2, pp. 91-96

Increasing Power Consumption Efficiency of Smart Devices Using Usage Pattern (UIPE)

Md. Arif Ibne Ali, Rayhan Hossain, Rayhanul Islam and Rayhanur Rahman

International Journal of Software & Hardware Research in Engineering (IJSHRE)

DDT and its Metabolites in fresh water fish samples

Md. Amjad Hossain, Mohammad Shoeb and Nilufar Nahar

Journal of Food Science and Engineering, vol. 6, pp. 344-350

Extraction Of Chromium From Leather Chrome Shaving Dust

Ashiqur Rahaman, Md. Razib Hosen, Khairul Bashar, Jahan Sadia Afroze and Umme Habiba Bodrun Naher

INTERNATIONAL JOURNAL OF SCIENTIFIC & TECHNOLOGY RESEARCH, vol. VOLUME 5, ISSUE 10,, no. ISSUE 10, pp. Page No. 160-163

Organochlorine pesticide residues in and fatty acid composition in fresh water fish samples

Md. Amjad Hossain, Md. Golam Kibria, Mohammad Shoeb and Nilifar Nahar

16th Asian Chemical Congress, Dhaka

Organochlorine pesticide residues in and fatty acid composition in fresh water fish samples

Md. Amjad Hossain, Md. Golam Kibria, Tonima Mustafa, Mohammad Shoeb and Nilufar Nahar

16th Asian Chemical Congress, Dhaka

OXIDATIVE TREATMENT BY HYDROGEN PEROXIDE FOR THE REMOVAL OF COD AND SULPHIDE FROM TANNERY LIMING WASTEWATER

R.K. Raha, D. Bhowmik, S.C. Sekhar, and M. Abdulla-Al-Mamun

The 3rd International Conference on Advances in Civil Engineering, Chittagong, Bangladesh, pp. 122-127

Garments Sizing System- Scientific methods of garments sizing

Sobur Ahmed, Fatema-Tuj-Zohra and Muhammad Abu Yousuf

LAP LAMBERT Academic Publishing, OmniScriptum GmbH & Co. KG, Heinrich-Bocking-Str. 6-8, 66121, Saarbrucken, Deutschland/ Germany

Garments Sizing System- Scientific methods of garments sizing

Sobur Ahmed, Fatema-Tuj-Zohra and Muhammad Abu Yousuf

Saarbrucken: LAP LAMBERT Academic Publishing, OmniScriptum GmbH & Co. KG, Heinrich-Bocking-Str. 6-8, 66121, Deutschland/ Germany

Mohammad Kamruzzaman and Seiji Kurihara. Photo Alignment Behaviour of Polyethene Imine Having Cyano Azobenzene Side Chain. Dhaka Univ. J. Sci. 63(2), 2015, 67-72.

Mohammad Kamruzzaman

Mohammad Kamruzzaman and Manoranjan Saha. Alkylation of p-chlorophenol with olefins in the presence of perchloric acid. Dhaka University Journal of Applied Science & Engineering. 3(1), 2015, 31-33.

Mohammad Kamruzzaman

Investigation on Physicochemical parameters of tannery effluent

Ali Md. Farhad, Naher Umme Habiba Bodrun, Chowdhury, Rahman G.M. Shafiru and Hasan Md. Mahmudul

Universal Journal of Environmental Research and Technology, vol. 5, no. 3, pp. 122-130

Workers occupational stress problem in selected industry

Nilufa Yeasmin, Mst. Anjuman Ara, Shamima Nasrin Khan and Md. Mosharraf Hossain

Int. J. Indian Culture and Business Management, vol. 10, no. 3

Analyzing the factors for rejection of leather in Bangladesh

Ali Md. Farhad, Naher Umme Habiba Bodrun, Hasan Md. Mahmudul, Nawze Md. Shakil and Ferdous Shahanama

Intenational Journal of scientific and Technology Research, vol. 4, pp. 332-335

Manufacturing of Novelty Leather from Cattle Stomach

Naher Umme Habiba Bodrun, Ali Md. Farhad, Hasan Md. Mahmudul and Rahman Md. Rezaur

Intenational journal of scientific and Technology Research, vol. 4, no. 12, pp. 40-44

Development of an Alternative Enzyme-assisted Dehairing Method of Animal Skins using Proteases from Bacillus lichenifurmis MZK05M9

Md. Arafat Al Mamun, Md. Abir Hosain, Sobur Ahmed, Fatema-Tuj-Zohra, Rajia Sultana, Md. Murad Khan, Marufa Zerin Akhter, Shakila Nargis Khan and Md. Mozammel Hoq

Bangladesh Journal of Microbiology, vol. 32, no. 1 & 2, pp. 33-97

Removal of chromium from tannery wastewater by tannery lime liquor; A very cost effective method

M. A. Mottalib, S. H. Somoal, M. S. Islam, M. N. Alam and M. N. Abser

Int. J. Curr. Res., vol. 7, no. 6, pp. 16795-98

Short term preservation of goat skin with indigenous Azadirachta Indica leaf to reduce the pollution load in Leather Processing

Sobur Ahmed, Fatema-Tuj-Zohra, Arup Sarker and Md. Abul Hashem

International Journal of Current Research, vol. 7, no. 10, pp. 21158-21161

Development of an Alternative Enzyme-assisted Dehairing Method of Animal Skins using Proteases from Bacillus lichenifurmis MZK05M9

Md. Arafat Al Mamun, Md. Abir Hosain, Sobur Ahmed, Fatema-Tuj-Zohra, Rajia Sultana, Md. Murad Khan, Marufa Zerin Akhter, Shakila Nargis Khan and Md. Mozammel Hoq

Bangladesh J. Micr., vol. 32, no. 1 & 2, pp. 33-97

Short term preservation of goat skin with indigenous Azadirachta Indica leaf to reduce the pollution load in Leather Processing, Int. J. Curr. Res., 2015, 7(10), 21158-21161.

Sobur Ahmed, Fatema-Tuj-Zohra, Arup Sarker and Md. Abul Hashem

Int. J. Curr. Res., vol. 7, no. 10, pp. 21158-21161

Investigation on physico-chemical parameters of tannery effluent

Md. Farhad Ali, Umme Habiba Bodrun Naher and A. M. Sarwar Uddin Chowdhury, G. M. Shafiur Rahman, Md. Mahamudul Hasan

Universal Journal of Environmental research and Technology, vol. Volume 5, no. Issue 3, pp. Page No. 122-130

Cost-effective Design Development of Medicated Footwear for Diabetic Patients

Adhir Chandra Paul,, Md. Abdulla-Al-Mamun, and Sujit Kumar Ray, Md. Ashraful Islam

International Journal of Engineering Research & Technology, vol. 4, no. 8, pp. 637-641

Characterization of the Effluents from Leather Processing Industries

Manjushree Chowdhury, M.G. Mostafa, Tapan Kumar Biswas, Abul Mandal and Ananada Kumar Saha

Environ. Process., vol. March, no. 2, pp. 173–187

Analyzing the factors for rejection of leather in Bangladesh

Md. Farhad Ali, Umme Habiba Bodrun Naher and Md.mahamudul Hasan, Md. Shakil Newze, Shahanama Ferdous

International Journal of Scientific and Technology Research, vol. Volume 4, no. Issue 11, pp. page No. 332-335

Manufacturing of Novelty Leather from cattle stomach

Umme Habiba Bodrun Naher and Md. Farhad Ali, Md. MMahmudul Hasan, Md. Rezaur Rahman, Md. Mahamudul Hasan

International Journal of Scientific and Technology Research, vol. Volume 4, no. Issue 12, pp. page No 40-44

Improvement the Photoelectrochemical Efficiency by Back-contact and Surface Modifications of LaTiO2N Electrode

Md. Abdulla-Al-Mamun, Tsutomu Minegishi, Takashi Hisatomi, Taro Yamada and Kazunari Domen

3rd International Symposium on Chemistry for Energy Conversion and Storage, Berlin: ChemEner

Design and Pattern Making for Leather goods and Garments Manufacture (Fundamentals, Technologies and Applications)

Uttam Kumar Roy

Dhaka: Digit4 Publishing group

Design and Pattern Making for Leather-Products Manufacture Practical

Uttam Kumar Roy

Dhaka: Digit4 Publishing group

Saumen Poddar, Mohammed Kamruzzaman, S. M. A. Sujan, M. Hossain, M. S. Jamal, M. A. Gafur, Mahfuza Khanam. Effect of compression pressure on lignocellulosic biomass pellet to improve fuel properties: Higher heating value. Fuel. 131, 2014, 43-48.

Mohammad Kamruzzaman

Removal of Chromium from Tannery Effluent by Using Low Cost Adsorbent.

Md. Rashed-Ul-Islam, Md. Alaol Azim, Rafiqul Islam, Md. Nurnabi

DHAKA UNIVERSITY JOURNAL OF APPLIED SCIENCE & ENGINEERING, vol. 2, no. 2, pp. 135-138

A simple effective treatment of tannery effluents

M. A. Mottalib, T. K. Mim and M. N. Abser

J. Bang. Aca. Sci., vol. 38, no. 2, pp. 235-239

Uptake and translocation of metals in different parts of crop plants irrigated with contaminated water from DEPZ area of Bangladesh

M. A. Goni, J. U. Ahmed, M. A. Halim, M. A. Mottalib and D. A. Chowdhury

Bull Environ Contam Toxicol, vol. 92, no. -, pp. 726-732

Tangent Dirac Structures and Poission Dirac Submanifolds

Md. Showkat Ali, M.G.M. Talukder and M.R.Khan

Dhaka Uni.j.Sci, vol. 62, no. 1, pp. 21-24

A study comparison between recycled waste paper reinforced polymer composite and hardboard

Rahman G.M. Shafiur, Al-Mmamun Muhammad Abdullah, Bashar Muhammad Shafiul, M.G. Mostafa, Ali Md. Farhad and Khan Mubarak A

Rajshahi University journal of Environment Science, vol. 3, pp. 9-15

A Package Based Clustering for enhancing software defect prediction accuracy

Rayhanul Islam and Kazi Sakib

7th International Conference on Computer and Information Technology (ICCIT) DHaka: IEEE, pp. 81-86

A peer to peer resource discovery scheme for provisioning in cloud using multi attribute range query

Rayhanur Rahman, Nadia Nahar, Rayhanul Islam and Kazi Sakib

International Conference on Informatics, Electronics & Vision (ICIEV) IEEE

A peer to peer resource discovery scheme for provisioning in cloud using multi attribute range query

Rahman, Rayhanur, Nadia Nahar, Rayhanul Islam, and Kazi Sakib

International Conference on Informatics, Electronics & Vision (ICIEV), IEEE, pp. 1-5

A Package Based Clustering for enhancing software defect prediction accuracy

Rayhanul Islam and Kazi Sakib

17th International Conference on Computer and Information Technology (ICCIT), DHaka: IEEE, pp. 81-86

Raw Hides and Skins: Structure, defects and curing

Noor Mohammad

Dhaka

Mechanical Engineering Workshop practice for Footwear Manufacture

Uttam Kumar Roy

Dhaka: Digit4 Publishing group

Ashequl Alam Rana, Mohammad Kamruzzaman and Manoranjan Saha. Catalytic Benzylation of Isomeric Xylenes with Benzyl Alcohol in the presence of Sulfuric Acid. Bangladesh Journal of Scientific and Industrial Research. 48(1), 2013, 75-80.

Mohammad Kamruzzaman

A Comparative Performance Study of Plasmon-induced Charge Separation of Au@TiO2, Au@Fe2O3, and Au@ZnO Photocell Thin-films

Md. Abdulla-Al-Mamun and Yoshihumi Kusumoto , Gazi Jahirul Islam

Journal of Scientific Research, vol. 5, no. 2, pp. 245-254

Mohammad Kamruzzaman, Sun-nam Kim, Yutaka Kuwahara, Tomonari Ogata, Seiji Kurihara. Thermal and Photo Alignment Behavior of Polyethylene Imine Having Methoxy Substituent Azobenzene Side Chain Group. Open Journal of Polymer Chemistry. 3, 2013, 92-98.

Mohammad Kamruzzaman

Au-Ultrathin Functionalized Core-Shell (Fe3O4@Au) Monodispersed Nanocubes for Combination of Magnetic/Plasmonic Photothermal Cancer Cell Killing

Md. Abdulla-Al-Mamun , and Yoshihumi Kusumoto , Tohfatul Zannat , Yuji Horie and Hirotaka Manaka

RSC Advances, vol. 3, no. 21, pp. 7816-7827

Treatment of leather industrial effluents by filtration and coagulation processes" Water Resources and Industry

Manjushree Chowdhury, M.G. Mostafa, Tapan Kumar Biswas and Ananada Kumar Saha

Water Resources and Industry, no. September

Assessment of Level of water Pollution Discharged from Hazaribagh: A Critical Study

Chandan Chakrabarty, Sobur Ahmed, Md. Mazaharul Huq, Fatema-Tuj-Zohra, Taslima Tabassum and Ashraf Ali Siddiqui

Int. J. Sci. & Eng. Res., vol. 4, no. 9, pp. 2318-2324

Assessment of Level of water Pollution Discharged from Hazaribagh: A Critical Study

Chandan Chakrabarty, Sobur Ahmed, Md. Mazaharul Huq, Fatema-Tuj-Zohra, Taslima Tabassum and Ashraf Ali Siddiqui

International Journal of Scientific & Engineering Research, vol. 4, no. 9, pp. 2318-2324

Analysis of the accumulation of chromium in vegetables in effluent affected and non-affected soil: A case study,

Rashedul Hasan, Sobur Ahmed, Chandan Chakraborty, Md Mazaharul Huq, Taslima Tabassum, Ramon Rana and Sohel Rana

International Journal of Scientific and Engineering Research, vol. 4, no. 9, pp. 2431-2435

Analysis of the Causes And Impacts of Water pollution of Buriganga River: A Critical Study

Chandan Chakrabarty, Md Mazaharul Huq, Sobur Ahmed, Taslima Tabassum and Md Rubel Miah

International Journal of Scientific & Technology Research, vol. 2, no. 9, pp. 245-252

An approach to utilize crust leather scrapes, dumped into the land, for the production of environmental friendly leather composite

Shamsun Nahar, M. A. Khan, R. A. Khan, E. C. B. Abdullah, M. J. H. Khan, R. Islam, F. Karim, M. Rahman, A. Rahman, A. A. Mahmud, A. K. Deb and U. H. B. Naher

Engineering Journal Volume, vol. Volume 17, no. Issue 3, pp. Page No. 17-24

MIE12-070 Study on Workers Occupational Stress and Guidelines at Jute Mills in Bangladesh

Md Mohibul Islam, Md Mosharraf Hossain, Shamima Nasrin Khan, Mst Anjuman Ara and Nilufa Yeasmin

Mohammad Kamruzzaman, Ashequl Alam Rana and Manoranjan Saha. Optimization of Process Conditions for Catalytic Alkylation of Isomeric Cresols with Cyclohexene. Bangladesh Journal of Scientific and Industrial Research. 47(2), 2012, 153-160.

Mohammad Kamruzzaman

Hydrothermal Novel Synthesis of Neck-structured Hyperthermia-suitable Magnetic (Fe3O4, γ-Fe2O3 and α-Fe2O3) Nanoparticles

Md. Shariful Islam,Junichi Kurawaki, Yoshihumi Kusumoto,, Md. Abdulla-Al-Mamun and Md. Zobayer Bin Mukhlish

Journal of Scientific Research, vol. 4, no. 1, pp. 99-107

Synthesis, Characterization and Application of Dumbbell-Shaped Magnetic (Fe3O4 and γ-Fe2O3) Nanoparticles against HeLa (Cancer) Cells

Md. Shariful Islam, Yoshihumi Kusumoto,, Md. Abdulla-Al-Mamun and Hirotaka Manaka

Current Nanoscience, vol. 8, no. 6, pp. 811-818

Mohammad Kamruzzaman, Ashequl Alam Rana, Md. Zahangir Alam and Manoranjan Saha. Application of a Mathematical Model by Means of Experimental Design to Alkylation of o-Cresol with Cyclohexene. Dhaka University Journal of Science. 60(1), 2012, 79-85.

Mohammad Kamruzzaman

Manoranjan Saha, Md. Kabir Hossain, Md. Ashaduzzaman, Dipti Saha, Shams Tania Afroza Islam, A. M. Sarwaruddin Chowdhury and Mohammad Kamruzzaman. A mathematical model for the alkylation of phenol with octanol-1. Dhaka University Journal of Science. 60(1), 2012, 65-70.

Mohammad Kamruzzaman

Ashequl Alam Rana, Mohammad Kamruzzaman and Manoranjan Saha. Catalytic Benzylation of o-Cresol with Benzyl Alcohol: A Mathematical Model. Bangladesh Journal of Scientific and Industrial Research. 47(1), 2012, 137-142.

Mohammad Kamruzzaman

A new, simple hydrothermal synthesis of magnetic nano-octahedrons-Application to hyperthermia cancer cell killing

Md. Abdulla-Al-Mamun,, Yoshihumi Kusumoto, and Md. Shariful Islam

Canadian Journal of Chemistry, vol. 90, no. 8, pp. 660-665

Manoranjan Saha, Bithi Scholastica Palma, Dipti Saha, Md. Zahangir Alam, Md. Alaul Azim, A. M. Sarwaruddin Chowdhury and Mohammad Kamruzzaman. Indanylation of Phenol with Indene in the presence of Benzenesulphonic Acid. Dhaka University Journal of Science. 60(1), 2012, 93-96.

Mohammad Kamruzzaman

Enhancement of cumulative photoirradiated and AC magnetic-field induced cancer (HeLa) cell killing efficacy of mixed α and γ-Fe2O3 magnetic nanoparticles

Md. Shariful Islama, Yoshihumi Kusumoto,, Md. Abdulla-Al-Mamun, and Yuji Horie and Hirotaka Manaka

New Journal of Chemistry, vol. 36, pp. 1201-1209

A comparative study on heat dissipation, morphological and magnetic properties of hyperthermia suitable nanoparticles prepared by co-precipitation and hydrothermal method

Md. Shariful Islam, Yoshihumi Kusumoto, Junichi Kurawaki,, Md. Abdulla-Al-Mamun and Hirotaka Manaka

Bulletin of Materials Science, vol. 35, no. 7, pp. 1047-1053

Enhanced Phototocatalytic Activity of Ag @ Fe-doped TiO2 Composite Nanoclusters against Human Epithelial Carcinoma Cells

Md. Abdulla-Al-Mamun, and Yoshihumi Kusumoto, Md. Shariful Islam

Journal of Materials Chemistry, vol. 22, pp. 5460-5469

Determination of abdominal fat thickness using dual electrode separation in the focused impedance method (FIM)

Nusrat Jahan Surovy, Md Masum Billah, Salahuddin Haowlade, Golam Dastegir Al-Quaderi and K Siddique-e Rabbani

PHYSIOLOGICAL MEASUREMENT

Exterior Algebra with differential forms on Manifolds

Md. Showkat Ali, K.M.Ahmed, M.R.Khan and Md. Mirazul Islam

Dhaka. Uni.J.Sci, vol. 60, no. 2, pp. 247-252

Submanifolds of Riemannian Manifolds is totally geodesic in tangent bundle

M.R.Khan, Md. Abu Hanif Sarkar and Md. Showkat Ali

CDR journal, vol. 5, no. 1

Continuous Dependence of Fixed Points on Parameters and Initial Conditions

Md. Rezaul Islam, Razina Firdausi, Md. Showkat Ali and M.R.Khan

Dhaka Uni.j.Sci, vol. 60, no. 1, pp. 21-24

Ashequl A. Rana, Mohammad Kamruzzaman and Makoto Takafuji. Synthesis and evaluation of L-glutamide derived carbonyl group containing RP-HPLC phase for Polycyclic Aromatic Hydrocarbon (PAH) separation. Bangladesh Journal of Scientific and Industrial Research. 46(3), 2011, 271-276.

Mohammad Kamruzzaman

Mohammad Kamruzzaman, Yutaka Kuwahara, Tomonari Ogata, Seiji Ujiie, Seiji Kurihara. Substituent effects on thermal and photo-alignment behavior of poly(ethylene imine)s carrying azobenzene side groups. Polymer International. 60, 2011, 730-737.

Mohammad Kamruzzaman

An investigation to identify upper materials for optimum inshoe climate

Noor Mohammad, Dr. Robert Chen and Dr. Patrick Callaghan

Journal of Applied Science & Engineering, vol. 2, no. 1, University of Dhaka, pp. 45-51

Mohammad Kamruzzaman, Tomonari Ogata and Seiji Kurihara. Fabrication of novel light driven polymeric actuator. Dhaka University Journal of Applied Science & Engineering. 2(1), 2011, 53-57.

Mohammad Kamruzzaman

Mohammad Kamruzzaman, Yutaka Kuwahara, Tomonari Ogata, Seiji Ujiie and Seiji Kurihara. Synthesis, characterization and thermal and photo alignment behavior of polyethylene imines having butyl substituent azobenzene side chain group. Molecular Crystals and Liquid Crystals. 550, 2011, 134-148.

Mohammad Kamruzzaman

Mohammad Kamruzzaman, Yutaka Kuwahara, Tomonari Ogata, Seiji Ujiie, Seiji Kurihara. Synthesis, Thermal and Photo alignment behavior of polyethylene imines having nitro substituent azobenzene side chain group. Journal of Applied Polymer Science. 120, 2011, 950-959.

Mohammad Kamruzzaman

Ecological aspects of cross linking agents and their role in leather finishing for the production of finished leather

Sobur Ahmed and Fatema-Tuj-Zohra

LeatherAge, a monthly journal devoted to leather & its allied industry from India, vol. XXXIII, no. 2, pp. 67-71

Ecological aspects of cross linking agents and their role in leather finishing for the production of finished leather

Sobur Ahmed and Fatema-Tuj-Zohra

LeatherAge, a monthly journal devoted to leather & its allied industry from India, vol. XXXIII, no. 2, pp. 67-71

Synergistic Cell-killing by Magnetic and Photoirradiation effects of Neck-structured α- Fe2O3 against Cancer (HeLa) Cells

Md. Shariful Islam, Yoshihumi Kusumoto,, Md. Abdulla-Al-Mamun and Yuji Horie

Chemistry Letters, vol. 40, no. 7, pp. 773-775

Novel rose-type magnetic (Fe3O4, γ-Fe2O3 and α-Fe2O3) nanoplates synthesized by simple hydrothermal decomposition

Md. Shariful Islam, Yoshihumi Kusumoto, and Md. Abdulla-Al-Mamun

Materials Letters, vol. 66, pp. 165-167

Cytotoxicity and Cancer (HeLa) Cell Killing Efficacy of Aqueous Garlic (Allium sativum) Extract

Md. Shariful Islam, Yoshihumi Kusumoto, and Md. Abdulla-Al-Mamun

Journal of Scientific Research, vol. 3, no. 2, pp. 375-382

Synergistic Cell-Killing by Photocatalytic and Plasmonic Photothermal Effects of Ag@TiO2 Core-Shell Composite Nanoclusters against Human Epithelial Carcinoma (HeLa) Cells

Md. Abdulla-Al-Mamun, and Yoshihumi Kusumoto, Tohfatul Zannat, and Md. Shariful Islam

Applied Catalysis A: General, vol. 398, no. 1-2, pp. 134-142

Photocatalytic and AC Magnetic-field Induced Enhanced Cytotoxicity of Fe3O4@TiO2 Core-shell Nanocomposites against HeLa Cells

Md. Shariful Islam, Yoshihumi Kusumoto,, Md. Abdulla-Al-Mamun and Yuji Horie

Catalysis Communications, vol. 16, pp. 39-44

Enhanced Cancer Cell (HeLa) Killing Efficacy of Mixed Αlpha and Gamma Iron Oxide Supermagnetic Nanoparticles Under Combined AC (Alternating Current) Magnetic-Field and Photoexcitation

Md. Shariful Islam, Yoshihumi Kusumoto,, Md. Abdulla-Al-Mamun and Yuji Horie

IIUM Engineering Journal, vol. 12, no. 4, pp. 67-72

Synergistic Enhanced Photocatalytic and Photothermal Cytotoxic Activity of Au@TiO2 Nanopellets against Human Epithelial Carcinoma (HeLa) Cells

Md. Abdulla-Al-Mamun, and Yoshihumi Kusumoto, Tohfatul Zannat, Md. Shariful Islam

Physical Chemistry Chemical Physics, vol. 13, pp. 21026–21034

Bianchi Identities on Distinguished Superconnections

Md. Showkat Ali, M.G.M. Talukder, M.R.Khan and Md. Abu Hanif Sarkar

Dhaka Uni.j.Sci, vol. 59, no. 2, pp. 235-239

AC Magnetic-Field Induced and Photoexcited Cancer Cell (Hela) Killing Efficacy of Mixed α and γ-Fe2O3 Superparamagnetic Nanoparticles

Md. Shariful Islam, Yoshihumi Kusumoto,, Md. Abdulla-Al-Mamun, and Yuji Horie

The 2nd International Conference on Biotechnology Engineering, Kuala Lumpur, Malaysia, pp. 557-559

Improvement of natural polymer-leather matrix with micro size reinforced basic chrome sulphate

Shamsun Nahar, Sobur Ahmed, Amal Kanti Deb, Abdullah-Al-Mahmud and Tareq-Bin-Sattar

National conference on physics for development, Dhaka-1000: Bangladesh Physical Society in BUET

Fabrication, N-doping mechanism and evaluation of N-doped TiO2 thin films based on laser ablation method

Shouichi Somekawa, Yoshihumi Kusumoto, Md. Abdulla-Al-Mamun and Bashir Ahmmad

Journal of Scientific Research, vol. 2, no. 1, pp. 17-23

Mohammad Kamruzzaman, Tomonari Ogata, Yutaka Kuwahara, Seiji Ujiie & Seiji Kurihara. Thermal and Photo Alignment Behavior of Polymers in Multiply-Layered Films Composed of Polyethylene Imines Having Azobenzene Side Chain Groups and Polyvinyl Alcohol. Molecular Crystals and Liquid Crystals. 529, 2010, 32-41.

Mohammad Kamruzzaman

Journal of Phys Abdominal fat thickness measurement using Focused Impedance Method (FIM) – phantom study

Salahuddin Haowlader, Tanveer Noor Baig and K Siddique-e Rabbani

Journal of Physics

A new type of solid state solar cell based on Fe2O3 , SiC and crystal growth inhibitors

Bashir Ahmmad, Yoshihumi Kusumoto, and Md. Abdulla-Al-Mamun

Journal of Scientific Research, vol. 2, no. 1, pp. 1-8

Photocatalytic Cancer Cell-killing (HeLa) Enhanced with Cu-TiO2 Nanocomposite

Md. Abdulla-Al-Mamun, and Yoshihumi Kusumoto, Bashir Ahmmad, Md. Shariful Islam

Topics in Catalysis, vol. 53, no. 7-10, pp. 571-577

Controlled Mesoporous self-assembly of ZnS microsphere for photocatalytic degradation of Methyl Orange dye

M. Muruganandham, R. Amutha, Evelina Repo, Mika Sillanpaa, Yoshihumi Kusumoto and Md. Abdulla-Al-Mamun

Journal of Photochemistry and Photobiology A: Chemistry, vol. 216, pp. 133-141

Carbon-phosphorus and carbon-hydrogen bond activation of tri(2-thienyl)phosphine at dirhenium and dimanganese centers

M. N. Uddin, M. A. Mottalib, N. Begum, S. Ghosh, A. K. Raha, D. T. Haworth, S. V. Lindeman, T. A. Siddiquee, D. W. Bennett, G. Hogarth, E. Nordlander and S. E. Kabir

Organometallics, vol. 28, pp. 1514-1523

Enhancement of Photocatalytic Cancer Cell-Killing Activity by Using Ag@TiO2 Core-Shell Composite Nanoclusters

Md. Abdulla-Al-Mamun and Hailong Yang and Yoshihumi Kusumoto

NSTI-Nanotech, vol. 2, pp. 11-14

Effect of Single Walled Carbon Nanotube as Counter Electrode on Laser-deposited Fe2O3 and TiO2 Films Solar Cells

Bashir Ahmmad, Yoshihumi Kusumoto,, Md. Abdulla-Al-Mamun and Aki Mihata, Hailong Yang

Journal of Scientific Research, vol. 1, no. 3, pp. 430-436

Wet-type Fe2O3 solar cells based on Fe2O3 films prepared by laser ablation: drastic temperature effect

Shouichi Somekawa, Yoshihumi Kusumoto,, Md. Abdulla-Al-Mamun and Manickavachagam Muruganandham, Yuji Horie

Electrochemistry Communications, vol. 11, no. 11, pp. 2150-2152

Mineralizer-Assisted Shape-Controlled Synthesis, Characterization and Photocatalytic Evaluation of CdS Microcrystals

Manickavachagam Muruganandham, Yoshihumi Kusumoto, Okamoto Chiyo, Muruganandham Amutha,, Md. Abdulla-Al-Mamun and Bashir Ahmmad

The Journal of Physical Chemistry C, vol. 113, no. 45, pp. 19506-19517

Cytotoxic Evaluation of Ag@TiO2 Core-shell Composite Nanocluster against Cancer Cells

Md. Abdulla-Al-Mamun, and Yoshihumi Kusumoto, and Md. Shariful Islam

Chemistry Letters, vol. 38, no. 10, pp. 950-952

Enhanced Photocatalytic Cytotoxic Activity of Au@TiO2 Nanopellets against Human Epithelial Carcinoma (HeLa) Cells

Md. Abdulla-Al-Mamun, and Yoshihumi Kusumoto, Md. Shariful Islam, and Hailong Yang

Chemistry Letters, vol. 38, no. 10, pp. 950-952

New Simple Synthesize of Cu-TiO2 Nanocomposite: Highly Enhancing of Photo Catalytic Cell-killing Observation on Epithelia Carcinoma (HeLa) cell

Md. Abdulla-Al-Mamun and Yoshihumi Kusumoto

Chemistry Letters, vol. 38, no. 8, pp. 826-827

Simple New Synthesis of Copper Nanoparticles in Water/acetonitrile Mixed Solvent and their Characterization

Md. Abdulla-Al-Mamun, and Yoshihumi Kusumoto, Manickavachagam Muruganandham

Materials Letters, vol. 63, no. 23, pp. 2007-2009

Plasmon-induced Photothermal Cell-killing Effect of Gold Colloidal Nanoparticles on Epithelial Carcinoma Cells

Md. Abdulla-Al-Mamun, and Yoshihumi Kusumoto, Aki Mihata, Md. Shariful Islam, Bashir Ahmmad

Photochemical and Photobiological Sciences, vol. 8, no. 8, pp. 1125-1126

Solid State Solar Cells Based on Fe2O3 and SiC : Effect of Crystal Growth Inhibitor

Bashir Ahmmad, Yasuhiro Kitamura, Yoshihumi Kusumoto, and Md. Abdulla-Al-Mamun

The 6th International Symposium on Transparent Oxide Thin Films Electronics and Optics (TOEO-6), pp. 16p-P125-1~4

N-doping Process and Evaluation of N-doped TiO2 thin films prepared by laser ablation method

Shouichi Somekawa, Yoshihumi Kusumoto,, Md. Abdulla-Al-Mamun and Yuji Horie

The 6th International Symposium on Transparent Oxide Thin Films Electronics and Optics (TOEO-6), pp. 16p-P094-1~3

One Step Synthesis of Hallow Sphere C-doped TiO2 Submicrostructures

Bashir Ahmmad, Yoshihumi Kusumoto and Md. Abdulla-Al-Mamun

The 6th International Symposium on Transparent Oxide Thin Films Electronics and Optics (TOEO-6),, pp. 15p-P042-1~4

Effect of Thermal treatment of Fe2O3/FTO Films on Performance of Wet-type Fe2O3 Solar Cells

Shouichi Somekawa, Yoshihumi Kusumoto,, Md. Abdulla-Al-Mamun and Makoto Nakashima and Yuji Horie

The 6th International Symposium on Transparent Oxide Thin Films Electronics and Optics (TOEO-6), Tokyo, Japan, pp. 15p-P034-1~3

Effect of Laser Ablation on TiO2 / Graphite Silica System for Photocatalytic Hydrogen Production from Water-Alcohol Mixture

Hailong Yang, Yoshihumi Kusumoto,, Md. Abdulla-Al-Mamun, and Miyuki Ikeda, and Bashir Ahmmad

The 12th Japan-Korea Symposium on Catalysis, Akita, Japan, pp. 164

A Novel Synthesis of Cu / TiO2 Photocatalyst for Photocatalytic Cancer (HeLa) Cell Killing

Md. Abdulla-Al-Mamun, and Yoshihumi Kusumoto, Hailong Yang and Md. Shariful Islam

The 12th Japan-Korea Symposium on Catalysis, Akita, Japan, pp. 80

Photothermal and Photocatalytic Cell-killing Effect of Au Colloidal Nanoparticles and Au-capped TiO2 Nanocomposite Photocatalysts on HeLa cell

Md. Abdulla-Al-Mamun, and Yoshihumi Kusumoto, Aki Mihata, Bashir Ahmmad and M. Muruganandham

of the International Conference on Materials for Advance Technologies (ICMAT 2009), Suntec city, Singapore, pp. 14

Md. Zahangir Alam, Ashraful Alam, Md. Kamruzzaman, Seiji Kurihara, Manoranjan Saha. Development of a mathematical model by means of experimental design for alkylation of m-cresol with cyclopentene. Chemical Engineering Journal, 137, 2008, 598-602.

Md. Kamruzzaman

Chiral and achiral phosphine derivatives of alkylidyne tricobalt carbonyl clusters as catalyst precursors for (asymmetric) inter- and intramolecular Pauson-Khand reactions

V. Moberg, M. A. Mottalib, D. Sauer, Y. Poplavskaya, D. C. Craig, S. B. Colbran, A. J. Deeming and E. NordlanderDalton Trans., 2008, 2442-2453.

Dalton Trans., pp. 2442-2453

Photocatalytic hydrogen production enhanced by laser ablation in water–methanol mixture containing titanium (IV) oxide and graphite silica

Miyuki Ikeda, Yoshihumi Kusumoto, Hailong Yang, Shouichi Somekawa, Hayato Uenjyo, Md. Abdulla-Al-Mamun and Yuji Horie

Catalysis Communications, vol. 9, pp. 1329-1333

Tandem Cell for Photocatalytic Hydrogen Production: Material Design

Bashir Ahmmad, Hailong Yang,, Md. Abdulla Al-Mamun, and Yoshihumi Kusumoto

The 2008 Korea-Japan Symposium on Frontier Photoscience, Jeju, Korea, pp. 116-117

Two modes of C-H bond activation of tris(2-thienyl)phosphine in trinuclear osmium carbonyl clusters

M. A. Mottalib, S. E. Kabir, A. J. Deeming and E. Nordlander

J. Organomet. Chem., 2007, 692, 5007-5017., vol. 692, pp. 5007-5017

Electrogeneration of Al-oxyhydroxide and its characterization

H. A. Shimul, M. Y. A. Mollah and M. A. Mottalib

J. Bang. Aca. Sci., vol. 31, no. 1, pp. 143-149

Preparation and Application of Nanoparticles by Laser Ablation in Liquid Environment

H.Yang, M. Abdulla-Al-Mamun and M. Ikeda, Y. Horie and Y. Kusumoto

The 365th Topical Meeting of The Laser Society of Japan, Fukuoka, pp. 31-36

Enhancement effect of laser ablation in liquid on hydrogen production using titanium(IV) oxide and graphite silica

Hailong Yang,, Yoshihumi Kusumoto, Miyuki Ikeda, Hayato Uenjyo,, Md. Abdulla-Al-Mamun and Shouichi Somekawa and Bashir Ahmmad

The ISES Solar World Congress 2007, Beijing, pp. 2790-2794

Mahmud Hasan Tareque, Mohammad Ismail, Shams Tania Afroza Islam, Mohammad Kamruzzaman, Manoranjan Saha. Reaction of xylenes with benzyl chloride in the presence of anhydrous aluminum chloride. Bangladesh Journal of Scientific and Industrial Research, 41(3-4), 2006, 251-256.

Mohammad Kamruzzaman

Syntheses and Fluxional processes of Diphenyl(2- thienyl)phosphane Derivatives of Triosmium Clusters

N. K. K. Kazemifar, M. J. Stchedroff, M. A. Mottalib, Simona Selva, M. Monari, and E. Nordlander

Eur. J. Inorg. Chem., pp. 2058-2068

Reactions of [(µ-H)Os3(CO)10(µ-OMe)] and [(µ-H)Os3(CO)9(µ-OMe)(MeCN)] with dppm, dppe, dppp, and PPh2H: X-ray Crystal Structures of [(µ-H)Os3(CO)8(µ-OMe)(µ2-η2-dppm)] and [(µ-H)Os3(CO)9(µ-OMe)(PPh2H)]

S. E. Kabir, M. A. Mottalib, G. M. G. Hossain, E. Nordlander and E. Rosenberg

Polyhedron, vol. 25, pp. 95-104

Productivity improvement by line balancing in closing room for the production of footwear

Sobur Ahmed and Fatema-Tuj-Zohra

Footwear Digest, a quarterly magazine from FDDI, India, vol. 43, pp. i-vii

Productivity improvement by line balancing in closing room for the production of footwear

Sobur Ahmed and Fatema-Tuj-Zohra

Footwear Digest, a quarterly magazine from FDDI, India, vol. 43, no. 1, pp. i-vii

Reaction [Os3(-H)(-OH)(CO)10] with PPh2H : X-ray crystal structure of [Os3(-H)2(CO)8(-PPh2)2]

M. A. Mottalib, N. Begum, S. E. Kabir and G. M. G. Hossain

J. Bang. Aca. Sci., vol. 29, no. 2, pp. 135-143