Md. Abdus Shabur

Md. Abdus Shabur and Md. Asif Al Arafat "Design & Analysis of an IoT Based Liquid Flow Control & Quality Monitoring System." Intelligent Networks and Systems. Chapman and Hall/CRC, 2025 134-147 .

Mitu Shikder, Tasnuva Jahan Nuva and Md. Abdus Shabur "Analysing the Problems of Typical Building Management System in Bangladesh: An Approach to IoT Based Automated Building Management." Intelligent Networks and Systems. Chapman and Hall/CRC, 2025 75-88 .

Md Farhad Ali, Rupok Kumar Nayak, Mohammad Al Shahriar Khan, Md Ahsanul Haque Milon and Md Abdus Shabur : Sustainable polymer composites reinforced with leather waste using natural rubber latex, aluminum oxide and fish oil, Discover Materials (impact factor:5.8) Springer , 2026 .

Md Ariful Islam, Nujhat Tabassum, Md Abdus Shabur, Umme Habiba Bodrun Naher and Md Abdul Mottalib : Extraction of Cellulose Nanocrystals from Nypa fruticans and Their Reinforcement Effect in PVC--Leather Waste Composites, Textile & Leather Review (impact factor:1.66) , vol.9 , no.2026 idd3, Croatia , pp.6039-6067 , 2026 .

Md. Abdus Shabur : Industrial Robotics From Industry 4.0 to Industry 5.0: An Analysis of Architectures, Human-Centricity and Sustainability, IET Collaborative Intelligent Manufacturing (impact factor:3.3) , vol.8 , no.1 , pp.e70064 , 2026 .

Md Abdus Shabur : Digital steel heat treatment design integrating transformation kinetics microstructure architecture and prescriptive digital twins, Discover Materials (impact factor:5.8) Springer , 2026 .

Md Farhad Ali and Md Abdus Shabur : Bio-architectural reinforcements in polymer composites: a comprehensive review of animal fiber--based materials, interfaces, and applications, Polymer Bulletin (impact factor:4.0) , vol.83 , no.8 Springer , pp.427 , 2026 .

Samudra Jit Saha, Marufa Akter, Nowreen Jahan, Sayma Islam, Abid Chowdhury and Md Abdus Shabur : Material Selection and Fiber Orientation Effects in Composite Overwrapped Steel Pipelines: A Numerical Study for Burst Pressure Enhancement, Journal of Sustainable Smart Materials and Structural Systems , vol.2 , pp.61--74 , 2026 .

Md Shah Alam Sarker, Salman Mahamud, Pial Barua, Abhi Chowdhury, Md Jillur Rahman, Md Abdus Shabur, Md Saiful Islam and Md Moinul Islam : Performance assessment of medical waste incineration ash as partial cement replacement in concrete: Bangladesh perspective, Scientific Reports (impact factor:3.90) Nature Publishing Group UK London , 2026 .

Mohon Chandra Dhar, Saidur Rahman Shakil, Md. Amjad Hossain, Md. Abdus Shabur, Umme Habiba Nila and Md. Abdul Mottalib : Innovative use of tannery solid waste and jute fiber in sustainable leather composites for footwear in Bangladesh, Journal of Material Cycles and Waste Management (impact factor:3.2) Springer Nature , pp.1-19 , 2026 .

Abdus Shabur and Md Jisan Mahmud : Toward Smart and Autonomous Surface Quality Prediction: A Review of AI-Driven Approaches, Journal of Sustainable Smart Materials and Structural Systems , vol.1 , pp.71--87 , 2025 .

Md Abdus Shabur, Nusrat Jahan and Md Abdul Mottalib : Prioritizing critical factors for leather waste management in Bangladesh: an ISM-MICMAC and best--worst method approach, Scientific Reports (impact factor:4.3) , vol.15 , no.1 Nature Publishing Group UK London , pp.41115 , 2025 .

Mst Anjuman Ara, Mst Tamanna Sadia, Muhammad Ali, Al Amin and Md Abdus Shabur : A hybrid AHP and statistical validation approach for sustainable supplier selection in apparel industry, Discover Sustainability (impact factor:2.4) , vol.6 , no.1 Springer , pp.1--25 , 2025 .

Sanjucta Saha Sithi, Mst Anjuman Ara, Ahnaf Tahmid Dhrubo, Abid Hasan Rony, Md Abdus Shabur and others : Sustainable supplier selection in the textile industry using triple bottom line and SWARA-TOPSIS approaches, Discover Sustainability (impact factor:2.4) , vol.6 , no.1 Springer , pp.1--23 , 2025 .

Md Abdus Shabur, Abid Shahriar, Mst Anjuman Ara and others : From automation to collaboration: exploring the impact of industry 5.0 on sustainable manufacturing, Discover Sustainability (impact factor:2.4) , vol.6 , no.1 Springer , pp.1--23 , 2025 .

Tanzim Redwan and Md Abdus Shabur : Analyzing the socio-economic factors of adolescent malnutrition in Bangladesh using Best Worst Method, Discover Sustainability (impact factor:2.4) , vol.6 , no.1 Springer , pp.1--16 , 2025 .

Syeda Sharaban Tahura, Md Abdus Shabur and Tasnuva Jahan Nuva : BWM analysis of online and offline learning effectiveness in Bangladesh, Scientific Reports (impact factor:3.8) , vol.15 , no.1 Nature Publishing Group UK London , pp.8377 , 2025 .

Md. Abdus Shabur, Jafrin Jahan and Protik Barua : Assessing the success of Education 4.0 in enhancing English proficiency for engineering students in Bangladesh, Discover Education (impact factor:0.8) , vol.4 , no.1 Springer Nature , pp.61 , 2025 .

Mehjabin Litu, Md Farhad Ali, Md Abdus Shabur, Mantaka Taimullah and Faisal Mahmud Arnob : Utilization of chromium tanned leather waste in cementitious and gypsum composites for sustainable construction materials, Discover Sustainability (impact factor:2.4) , vol.6 , no.1 Springer , pp.192 , 2025 .

Syeda Sharaban Tahura, Md. Abdus Shabur and Tasnuva Jahan Nuva : Evaluating the online and offline learning effectiveness in Bangladesh using Analytic Hierarchy Process, Discover Sustainability (impact factor:2.4) , vol.6 , no.1 Springer Nature , pp.84 , 2025 .

Md. Abdus Shabur : Analyzing the challenges and opportunities in developing a sustainable digital economy, Discover Applied Sciences (impact factor:7.0) , vol.6 , no.12 Springer , pp.1--23 , 2024 .

Mst Ara, Mafia Sultana, Sadia Sultana Mou, Md Sadman Azim Sakib and Md. Abdus Shabur : Assessing the obstacles to green supply chain management in Bangladesh's footwear industry using SWARA and ISM-MICMAC methods, Discover Sustainability (impact factor:2.3) , vol.5 , no.1 Springer , pp.1--20 , 2024 .

Md Abdus Shabur : The potential and implications of artificial intelligence in Bangladesh’s early career planning education, Discover Global Society , vol.2 , no.1 Springer , pp.1--11 , 2024 .

Md. Farhad Ali, Md. Abdus Shabur and SM Sarwaruddin Chowdhury : Gamma radiation’s influence on the tensile characteristics of waste animal fiber reinforced biocomposites, Discover Materials , vol.4 , no.1 Springer , pp.1--16 , 2024 .

Md. Abdus Shabur, Md. Farhad Ali and Md. Mukter Alam : Analysis of the barriers and possible approaches for adopting Industry 4.0 in the fertilizer sector of Bangladesh, Discover Applied Sciences (impact factor:2.8) , vol.6 , no.7 Springer , pp.369 , 2024 .

Md Farhad Ali, Md Abdus Shabur and GM Safiur Rahman : Comparison of the mechanical characteristics of biocomposites of unsaturated polyester resin with cellulose extracted from corn silk and treated corn silk, Discover Mechanical Engineering , vol.3 , no.1 Springer , pp.18 , 2024 .

Md. Abdus Shabur and Dr. Md. Farhad Ali : Perspectives and possibilities for developing ride-sharing services to promote sustainable mode of transport: Bangladesh perspective, Heliyon (impact factor:4.00) , vol.10 , no.12 Elsevier , 2024 .

Md. Abdus Shabur : A comprehensive review on the impact of Industry 4.0 on the development of a sustainable environment, Discover Sustainability (impact factor:2.6) , vol.5 , no.1 Springer , pp.97 , 2024 .

Md. Abdus Shabur and Dr. Md. Farhad Ali : An analysis of the correlation between income and the consumption of energy in Bangladesh, Energy Informatics (impact factor:3.6) , vol.7 , no.1 Springer , pp.17 , 2024 .

Md. Abdus Shabur and Md. Raihan Siddiki : Investigating social media's impact on the new era of interactive learning: A case study of Bangladesh, Heliyon (impact factor:4.0) Elsevier , 2024 .

Md. Abdus Shabur and Md. Amjad Hossain : Recent developments in environment-friendly methods for valuing leather waste as a means of promoting the circular economy: a comprehensive review., Leather & Footwear Journal/Revista de Pielarie Incaltaminte , vol.24 , no.1 Institutional National de Cercetare-Dezvoltare Pentru Texttile Pielarie, Romania , pp.51-72 , 2024 .

Md. Abdus Shabur and Jafrin Jahan : Use of smartphones for social networking-men vs women: case study of Bangladesh, Discover Global Society , vol.2 , no.1 Springer , pp.3 , 2024 .

Md. Abdus Shabur, Dr. Kazi Afzalur Rahman and Md. Raihan Siddiki : Evaluating the difficulties and potential responses to implement Industry 4.0 in Bangladesh’s steel sector, Journal of Engineering and Applied Science (impact factor:SJR 0.39 (Q3)) , vol.70 , no.1 Springer , pp.158 , 2023 .

Md. Abdus Shabur, Monowar Wadud Hridoy and Kazi Afzalur Rahman : The investigation of challenges of implementing Industry 4.0 in Bangladesh, Academia Letters , vol.2 Academia Letters , 2021 .

Md. Abdus Shabur, Afnan Hasan and Dr. Mohammad Ali : Comparison of aerodynamic behaviour between NACA 0018 and NACA 0012 airfoils at low Reynolds number through CFD analysis, Advancement in Mechanical Engineering and Technology , vol.3 , no.2 Zenodo , pp.1-8 , 2020 .